Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Drive test

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #49589
    anil
    Guest

    what is drive test and which parameters it take into account

    #49590
    Seki
    Guest

    Yuo do drive tests with software and some equipement, you need special phones and connected GPS. Also, you need 2 persons min, for drive tests, one to drive a car and other to do measurements. You connect equipement, and measure everithing, C/I,Rxlevel, neighbouring tests, etc, but you must have Tems drive investigation.

    #49591
    avinash kumar
    Guest

    how do we perform drive test.

    #49592
    pix
    Guest

    with a car, a laptop, TEMS software installed, a GPS + cable and a TEMS mobile + cable.

    #49593
    sachin Aneja
    Guest

    what is difference between loaded /unloaded drive test.

    #49594
    pix
    Guest

    i gues it has to do with the time of the drivetest. If you do it during the busy hour of the area you’re driving in, then it certainly is a “loaded” drivetest.

    It impacts the success of HO, call setup, and it increases the amount of interferences (because more radio frequency usage)

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.