Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NOKIA Base Station Frequency Reference

Viewing 10 posts - 16 through 25 (of 25 total)
  • Author
    Posts
  • #49472
    KJB
    Guest

    7601 appears due to DAC value drift,
    It has many causes.
    1-BSC Clock problem.
    2-Transmission problem(Unstable)
    3-BOIA faulty.

    Action.
    Kindly check BSC clock oscillator value,if Clock,Transmision and BOIA are OK,

    then Adjust DAC value on BTS site 2048 and send it to BTS through BTS manager.
    after this refresh OMU by MML.

    It should be clear.
    Some time this problem appears on many sites connected one HUB.

    Thx
    KJB

    #49473
    Sham
    Guest

    Have any one cant tell me the clock control Value of nokia ultra BTS

    #49474
    Fekede taeme
    Guest

    7601 BCF OPERATION DEGRADED
    Difference between PCM and base station frequency reference.
    02 01 07 96 00 00

    what is this alarm for?

    #49475
    Rendy Arizal
    Guest

    How to clearing alarm 7602 “Difference between current and last stable DAC words” for Flexi Multiradio EDGE BTS.
    Transport crossconnection with Eth.

    Thanks

    #49476
    sashi
    Guest

    Hi,

    I had big query in tch drop rate..how to reduce my tch drop

    #49477
    Anyaogu Arinze C.
    Guest

    What page on the Flexi Multi Radio will I set the DAC value?

    #49478
    DIBYA RANJAN MOHARANA
    Guest

    what is dac alarm.. and effect of dac alarm.. and resolution please suggest

    #49479
    Wilson
    Guest

    I want how to troubleshoot the alarm of difference between BTS master clock and reference frequency

    #74244
    Priso
    Guest

    I have the following alarm in my system ”difference between current and last stable dac words” and I don’t know where to start. If someone can help me.
    Thanks!

    #79717
    Max
    Guest

    Hi, i have an alarm “Timing accuracy not guaranteed to be within configured LTE limits for loose HSFN” using TOP-P, this is Phase Syncronization. I am the clock guy (TP4100 Microsemi inside CLARO NETWORK) but i am helping to the BTS guys to troubleshoot it.

    Any idea what is coming on with this site?

Viewing 10 posts - 16 through 25 (of 25 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.