Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DIP is not comming into service.

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #49439
    Nur
    Guest

    dip is showing abl & RDI fault.
    if FM guys give loop on that perticular E1.we get loop.but when throw or break the loop then i get again dip abl & rdi fault.

    #49440
    John
    Guest

    Possible causes
    DXU Faulty
    TX / RX reversed at BTS
    CRC value incorrect

    #49441
    Prabhakar Verma
    Guest

    Change the Tx and RX wire and check again…

    #49442
    Nur
    Guest

    RXOTRX-000-00 showing like below
    MO STATE
    RXOTRX-000-00 FAIL
    MO ALARM SITUATION
    RXOTRX-000-00 PERMANENT FAULT

    If i block/deblock & Out/In service.then it comes in service.
    but after 3 or 4 hours, the same problem again happens.Please give me Permanent solution.

    #49443
    mugna69
    Guest

    It happened to me sometimes..

    check crc value:

    dtbli:dip=…;
    dtidp:dip=…;
    dtidc:dip=…,crc=1;
    dtble:dip=…;

    try and let me know if it worked..

    #49444
    Nur
    Guest

    Hi Prabhakar Verma !

    By changing Tx and RX wire,the problem was resolved.

    Hi mugna69 !

    i did but…again…

    Hi John !
    Your advice gave me more knowledge.

    #49445
    John
    Guest

    Glad to help
    Its a common problem

    #49446
    Ibrahim
    Guest

    What is OML fault in Ericsson system? Can anyone help?

    #49447
    John
    Guest

    Can be a few things
    There is no connection to the TRX in the BTS
    The CF cannot communicate with the TRX
    Are the RXOIS and RXOCON working
    ABIS connections correct ?

    Not in Local mode ?

    #49448
    Ibrahim
    Guest

    Thanx John for responding to my quetion.

    #49449
    amit
    Guest

    Hi,

    Similar Problem i am also facing…TRU is going in fail mode, MO fault description is Permanent fault and Bus fault in few cases.

    we observed this alarm in 2204 BTS and 2964 BTS aswell.

    in 2204 BTS, we changed the BTS s/w from R25E to R22F and found that issue got resolved permanently ( haven’t repeated from 1-2 months)

    But issue is repeating in 2964 cabinet.

    #49450
    YUNUS
    Guest

    I are facing an issue wherein CF ,TF is operational But RXOIS does not come up resulting in All trx to remain down.

    Can you plz help.

    No DIP Errors found,
    This is happening when a site goes down, when it comes back One sector remains down.

    We have recently Implemented ABIS over IP for this RBSC.

    #49451
    Lalit parihar
    Guest

    Dip working but loading not taken by bts multiple sites are down in different different bsc in 2g only..

Viewing 13 posts - 1 through 13 (of 13 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.