Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

paging problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #49257
    Thierry
    Guest

    hi,

    on my network one MSC Siemens runs 1 bsc siemens and 1 bsc Ericsson.

    On Ericsson Bsc the paging success rate is best, but it is low on the other bsc.

    If someone can help me to find solution.

    Regards,

    #49258
    Thierry
    Guest

    number of lac per bsc:

    siemens: 9

    ericsson: 1

    #49259
    Gito Prastomo
    Guest

    Hi Thierry,

    As I know, the Ericsson BSC paging capacity is very high compared to Siemens BSC.

    As I know in Siemens BSC BR7, it has paging capacity about 270.000 paging/hour per LAC in 1 BSC.

    You could check the counter Total Paging transmitted, is it reach 80% of maximum paging or not.
    Or you could verify the other KPI like SDCCH Success Rate and TCH Blocking rate, because it affect Paging Success Rate

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.