Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

rbs 2206 and optimizeur L3COM

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #49249
    Thierry
    Guest

    hi,

    Ericsson rbs 2206

    when i connect directy the rbs on the vsat, its works normaly

    when i put optimizeur between the rbs and the vsat, the status of cf and its subord is noop.

    please help me to find the solution.

    #49250
    mis
    Guest

    please tell me what is the meaning of vsat and what is the purpose of it

    thanks

    #49251
    Mocha
    Guest

    Dear Thierry, pay attention: should be changed ‘SIGDEL’ parameter from ‘Normal’ to ‘Long’ on the RXMOC on TG level. because the VSAT is not terrestrial connection for the TG. do it and try.

    #49252
    Thierry
    Guest

    Thank for your answer,

    I already changed parameter ‘Sidgel’ to ‘long’ without result.

    Intelsat 707 is the satellite link.

    #49253
    TED
    Guest

    The fact that you connect RBS to VSAT works, SIGDEL is already long, I guess your optimizeur introduced too much delay.

    #49254
    Mocha
    Guest

    Dear All,
    Maybe there is sometning to chck also that is from satelite site there is capacity for how many channel will be carried should define from Satelite side. ask the satelite engineer for that.

    #49255
    willy
    Guest

    Hi,

    i would like to ask about LAC for VSAT site, will define different LAC for sites which connected by VSAT or …

    thank you,

    #49256
    SHELDON
    Guest

    Hi Willi,

    Yes, generally, it’s best to give different LACs to the sites connected via VSAT. This would greatly reduce the signalling to those sites and improve your SDCCH accessibility.

    Regards,
    SHELDON

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.