rbs 2206 and optimizeur L3COM This topic has 7 replies, 1 voice, and was last updated 12 years, 4 months ago by SHELDON. Viewing 8 posts - 1 through 8 (of 8 total) Author Posts 18th September 2007 at 21:12 #49249 ThierryGuest hi, Ericsson rbs 2206 when i connect directy the rbs on the vsat, its works normaly when i put optimizeur between the rbs and the vsat, the status of cf and its subord is noop. please help me to find the solution. 24th September 2007 at 16:53 #49250 misGuest please tell me what is the meaning of vsat and what is the purpose of it thanks 25th September 2007 at 10:18 #49251 MochaGuest Dear Thierry, pay attention: should be changed ‘SIGDEL’ parameter from ‘Normal’ to ‘Long’ on the RXMOC on TG level. because the VSAT is not terrestrial connection for the TG. do it and try. 27th September 2007 at 22:03 #49252 ThierryGuest Thank for your answer, I already changed parameter ‘Sidgel’ to ‘long’ without result. Intelsat 707 is the satellite link. 1st October 2007 at 09:02 #49253 TEDGuest The fact that you connect RBS to VSAT works, SIGDEL is already long, I guess your optimizeur introduced too much delay. 17th October 2007 at 10:38 #49254 MochaGuest Dear All, Maybe there is sometning to chck also that is from satelite site there is capacity for how many channel will be carried should define from Satelite side. ask the satelite engineer for that. 5th August 2010 at 15:28 #49255 willyGuest Hi, i would like to ask about LAC for VSAT site, will define different LAC for sites which connected by VSAT or … thank you, 5th August 2010 at 19:57 #49256 SHELDONGuest Hi Willi, Yes, generally, it’s best to give different LACs to the sites connected via VSAT. This would greatly reduce the signalling to those sites and improve your SDCCH accessibility. Regards, SHELDON Author Posts Viewing 8 posts - 1 through 8 (of 8 total) The forum ‘Telecom Design’ is closed to new topics and replies.