Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AGCH

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #49132
    NK
    Guest

    Hi! All,

    How can we increase AGCH success rate? Thank you.

    Regards,
    NK

    #49133
    aso
    Guest

    dear NK
    if you want to increase AGCH that in some operator there is dynamic configuration for AGCH which you can increase AGCH like ericsson

    #49134
    Gito Prastomo
    Guest

    Hi NK,

    The AGCH Success Rate must be about 99%-100%.
    You could rectify the problem. If the problem is on AGCH Blocking, you could add AGCH subslot, but remember the AGCH subslot is shared with Paging Subslot in A one CCCH. Adding the AGCH subslot will reduce Paging capacity.
    You must monitor first the paging capacity. If AGCH and Paging are high utilization, so you must add new site or sharing with other cell

    #49135
    pix
    Guest

    For reference, in non combined BCCH, you should have 5 blocks for PCH and 4 blocks for AGCH (this is the static solution, providing plenty of capacity)

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.