Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RX Diversity Alarm

Viewing 4 posts - 61 through 64 (of 64 total)
  • Author
    Posts
  • #49108
    jamil
    Guest

    hi Ali you have to check in omt rx bath level . 2-when they swap antenna they or rbs they have swap between jumper -3 vswr case this problem -4 in omt when you but fault u can see which antenna making red- 5 check all dug may be they swap jumper between 900 and 1800 any information let me know

    #49109
    Thant Zin Htun
    Guest

    1.How to clear the RX Path alarm permanently?
    (Normally we checked the physical condition, Jumper Cable conditions, bending shape, if we can’t also replaced by RRU and new Jumper cables but not cleared permanently).
    2.How to resolve the RX Diversity lost alarm?

    3.Why does appear the VSWR limited exceed alarm when using(U900+2G) at the one RRU?

    #49110
    Rex
    Guest

    Hi Thant Zin Htun,
    Check MHA or TMA if you’re using them. If yes, remove them and see if alarm disapears. If MHA is Ok, replace RRU. Is that happening in one or all sectors? What’s the vendor?
    Regards,
    Rex

    #49111
    hh
    Guest

    Need to clear 2a:58 alarm

Viewing 4 posts - 61 through 64 (of 64 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.