Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Paging Success Rate

Viewing 15 posts - 1 through 15 (of 88 total)
  • Author
    Posts
  • #48677
    Yang
    Guest

    Dears
    can any body told me How we can improve Paging Successful rate per BSC, parameters that effect.

    Best regards
    Yang

    #48678
    aso
    Guest

    dear yang
    the parameter that affect the performance of Paging success rate are:
    1\number of block for AGCH(BS_AG_BLKS_RES)
    2\multiFrame(BS-PA-MFRAMS).
    3\IMSI detach/ATTCH
    4\RACH min level.
    5\MAX retansmision
    and the most ipmortant is the number OF TRX per LAC

    #48679
    bhanu
    Guest

    Break ur LAC carefully, and redimension ur PCH.

    #48680
    Yang
    Guest

    Hi aso
    thank you for your quick response

    Yang

    #48681
    koush
    Guest

    Timer reserved for TMSI-req release at MSC must be compatible with (BS-PA-MFRAMS).

    BS-PA-MFRAMS may need reducement cuz it doesnt affect the paging load.

    further more you can avoid 2th page by IMSI, or change the 2 page attempt by TMSI.(for all n/w).

    For BSC try to optimize LA, by giving attention to SDCCH load (LU).

    #48682
    kamal
    Guest

    we are using CDMA 2000 1xRTT. in our system we are facing big problems. Most of the times shows paging fails. can some one tells me why paging fails? and how to solve or reduce this problems?

    Regards.

    Kamal, Sheba Phone

    #48683
    Max
    Guest

    Hi, what is the optimum number of TRX/Erlangs per LAC (Ericsson BSC)? also MFRMS value in order to improve Paging Successful Rate

    #48684
    Nantha
    Guest

    How to improve the Paging Sucess rate in ZTE/Ericsson??

    #48685
    Tony
    Guest

    For Ericsson check parameter “pagrep1la” . You can set 2nd page as Global and also increase paging timers to 6 sec.

    #48686
    preet
    Guest

    How to improve paging success rate in Nokio MSS/BSC?

    #48687
    Ravan Jaafar
    Guest

    Dears
    we have a problem of low Paging rate in the uplink in Huawei , what is the parameters that affect on it?? and what is the possible solution??

    #48688
    NARINDER
    Guest

    WHAT IS RACH MIN LAV

    #48689
    Vanderley
    Guest

    “”low Paging rate in the uplink”” ????

    #48690
    Pix
    Guest

    Huawei is doing UL paging, so that the MS can page its network, to check that the Huawei BTS is still working properly…

    :)))

    #48691
    krish
    Guest

    hi tony,

    By incresing the pagereply 1 time to 6 sec will improve the paging sucess rate?

Viewing 15 posts - 1 through 15 (of 88 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.