- This topic has 74 replies, 1 voice, and was last updated 2 years, 10 months ago by Suman.
28th September 2011 at 12:24 #48398vaibhav joshiGuest
Any buddy knows of Nokia flexi & ultra BTS temperature in full configuration.4th November 2011 at 20:20 #48399aGuest
about alarm 774523rd November 2011 at 19:16 #48400kapil jangirGuest
7745 alarm CHANNEL FAILURE RATE ABOVE
The rate of calls terminating in failure on a channel is above the
threshold value set by the operator. The alarm is used to supervise
the functioning of traffic and signaling channels, and to detect
the possible faulty channels.29th December 2011 at 14:08 #48401Kangalz ShiponGuest
What are the different types of internal alarms in BTS. E.g if any sector is down then which alarm rings. And how could we know about that. I want to know all these type of internal alarm.31st December 2011 at 13:01 #48402andieGuest
I have a problem with the bts, bts omusig not working, no slip on et, et’ve tried changing it can not, try replacing the module is also still can not … is there anything that can help my problem??28th February 2012 at 07:37 #48403Ali S.SaeedGuest
how can i solved the alarem NO.7745 in Nokia BTS3rd April 2012 at 13:53 #48404DinendranGuest
areas to check:
1) first check the cnt cable if ultra bts else check the pins and correct insertion if flexi bts
2) Check frequency interference which may cause channel failure due to excessive BER.
4) change trx backplane
5)change common back plane.
Common causes could be loose cabling and frequency interfernce.
Dinu13th May 2012 at 11:55 #48405JEETGuest
ANY SOLUTION FOR ALARM
“INTERFACE PROBLEM BETWEEN O&M AND DSP SOFTWARE” IN NOKIA ULTRA BTS??13th July 2013 at 05:45 #48406Amit pathakGuest
I want to know about BTS
1)-Types of BTS
2)Total alarms in BTS
3)How to calcukate EMF radiation in EMF survey radiated from tower?21st November 2013 at 10:20 #48407MOHANGuest
I WANT TO KNOW HOW TO RESOLVE THE ALARM OF COOLING FAN BROKEN WHEN FAN IS OK AND ITS CABLE IS ALSO OK14th January 2014 at 16:31 #48408ANIK DASGuest
1. how many types of grounding is donee in case of instalation??
2. detail informations about NOKIA FLEXI BTS alarms25th April 2014 at 07:14 #48409prashant chandelGuest
How can i Trace wih the software of the transmission line E1 cable path, forward and backward.28th April 2014 at 07:42 #48410Manoj kumar singhGuest
Tx power is too low11th October 2014 at 18:22 #48411Pawan NamdevGuest
1 All Nokia Bts alarm
2 Ceragon ip 10 alarm12th November 2014 at 17:32 #48412manish gangwarGuest
please help me for installation of external alarms for nokia flexi BTS equipement.