Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NOKIA BTS ALARMS

Viewing 15 posts - 46 through 60 (of 75 total)
  • Author
    Posts
  • #48398
    vaibhav joshi
    Guest

    Hi…
    Any buddy knows of Nokia flexi & ultra BTS temperature in full configuration.

    #48399
    a
    Guest

    about alarm 7745

    #48400
    kapil jangir
    Guest

    7745 alarm CHANNEL FAILURE RATE ABOVE
    DEFINED THRESHOLD
    Meaning
    The rate of calls terminating in failure on a channel is above the
    threshold value set by the operator. The alarm is used to supervise
    the functioning of traffic and signaling channels, and to detect
    the possible faulty channels.

    #48401
    Kangalz Shipon
    Guest

    What are the different types of internal alarms in BTS. E.g if any sector is down then which alarm rings. And how could we know about that. I want to know all these type of internal alarm.

    #48402
    andie
    Guest

    I have a problem with the bts, bts omusig not working, no slip on et, et’ve tried changing it can not, try replacing the module is also still can not … is there anything that can help my problem??

    #48403
    Ali S.Saeed
    Guest

    how can i solved the alarem NO.7745 in Nokia BTS

    #48404
    Dinendran
    Guest

    7745 alarm:
    areas to check:
    1) first check the cnt cable if ultra bts else check the pins and correct insertion if flexi bts
    2) Check frequency interference which may cause channel failure due to excessive BER.
    3)replace trx/bb2f
    4) change trx backplane
    5)change common back plane.

    Common causes could be loose cabling and frequency interfernce.

    Br
    Dinu

    #48405
    JEET
    Guest

    ANY SOLUTION FOR ALARM
    “INTERFACE PROBLEM BETWEEN O&M AND DSP SOFTWARE” IN NOKIA ULTRA BTS??

    #48406
    Amit pathak
    Guest

    I want to know about BTS

    1)-Types of BTS
    2)Total alarms in BTS
    3)How to calcukate EMF radiation in EMF survey radiated from tower?

    #48407
    MOHAN
    Guest

    I WANT TO KNOW HOW TO RESOLVE THE ALARM OF COOLING FAN BROKEN WHEN FAN IS OK AND ITS CABLE IS ALSO OK

    #48408
    ANIK DAS
    Guest

    1. how many types of grounding is donee in case of instalation??

    2. detail informations about NOKIA FLEXI BTS alarms

    #48409
    prashant chandel
    Guest

    How can i Trace wih the software of the transmission line E1 cable path, forward and backward.

    #48410
    Manoj kumar singh
    Guest

    Tx power is too low

    #48411
    Pawan Namdev
    Guest

    1 All Nokia Bts alarm
    2 Ceragon ip 10 alarm

    #48412
    manish gangwar
    Guest

    dear sir,
    please help me for installation of external alarms for nokia flexi BTS equipement.

    thank you

Viewing 15 posts - 46 through 60 (of 75 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.