- This topic has 74 replies, 1 voice, and was last updated 2 years, 11 months ago by Suman.
16th March 2010 at 04:31 #48368GhamizGuest
Please, if anyone can explain what action should be taken on “BCCH Missing” alarm 7706? What causes may generate it?
Will be really grateful!21st March 2010 at 15:01 #48369ranjeetGuest
mans fall29th March 2010 at 22:31 #48370afzal imamGuest
plz list out the internal & external alarm geneated by nokia flexiBTS22nd April 2010 at 15:29 #48371Pramod Kumar SinghGuest
I want information about all alarm genrated by nokia bts (both external & internal)14th May 2010 at 11:27 #48372RaviGuest
How many types of Alarams in Telecom Shelter2nd June 2010 at 11:17 #48373KJBGuest
7706 is due to O&M link down of BTS.Kindly check Site may be down,or LAPD for OM signalling may be OFF.
BCCH missing 7767 apears when BCCH TRX is down dou to any reason.
Kjb6th June 2010 at 20:17 #48374VincentGuest
Good day Sirs, how to resolve this problem? On site there’s no active alarm but on NOC there’s a Recovery Action Failure, and sometimes HSDPA failure indicating cell A, yet we’ve already replaced the FRGC module where cell A is located.
Please help me with this. Tnx6th June 2010 at 20:39 #48375VincentGuest
Sir Geoff about this sleeping cell issue, does 3G/HSDPA had this also? Thank you..
Nokia have a sleeping cell issue in S11.5, which is fixed in CD 4 I think (we are now on CD10) Many BTS’s report 7738 alarm (first supp info field will tell you if this is as SD/TCH/GPRS issue or combination of the 3) This issue is resolved by swapover of BCSU. Currently we have see an issue with 7738 alarms (again related to BCSU) following automatic recovery action of a bcsu, in this case all effected BTS’s require reset to resolve. Also it could be that your BTS is supervised 24 hrs a day (ZEEO:SUP;) and you genuinely have no traffic. In this case your supervision parameters need adjustment.7th June 2010 at 03:52 #48376GhamizGuest
Thanks KJB for the reply. Kindly tell what steps can be taken remotely remedy?7th June 2010 at 16:17 #48377jackGuest
it seems that you are expert in NOKIA BSC 3i.
i have one important question.
1.in NOKIA BSC 3i we have an extension of service terminal named:RCBUGG
with this extension we can replace the MML commands in the US command group (Working State
and Restart Handling) in situations in which the OMU is not in use and the
MML commands cannot be executed.
i want to know step to step which commands should apply for this ???
2-can we measure VSWR without the help of site master/spectrum analyzar??
please some on expert in NOKIA BSC3i explain it for me step to step.
thank u8th June 2010 at 19:27 #48378pritGuest
hi,what is full ,half,dual rate call in gsm.pls explain in brief ….14th June 2010 at 08:37 #48379IshGuest
Reasons for High TCH drop, though the DCR is low, no alarms. can any1 suggest me which parameter to look into n do optimization accordingly.27th June 2010 at 19:03 #48380sanchit jainGuest
can anyone tell me how many types of alarms are there in gsm site???
please list out all the internal and signalling or any other alarms???8th July 2010 at 05:24 #48381RajratnaGuest
Do we get any alarm when BCCH TRX comes up after claring BCCH Missing alarm?10th August 2010 at 09:01 #email@example.comGuest
if anyone can solve my problem i have to prepare a project inbts alarm monitoring &ihave no clue ,no idea can anyone send mea sample project sothat ican find iteasy to make currently i have just passed B.TECH 3RD YEAR
ITS QUITE URGENT