Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NOKIA BTS ALARMS

Viewing 15 posts - 16 through 30 (of 75 total)
  • Author
    Posts
  • #48368
    Ghamiz
    Guest

    Please, if anyone can explain what action should be taken on “BCCH Missing” alarm 7706? What causes may generate it?

    Will be really grateful!

    #48369
    ranjeet
    Guest

    mans fall

    #48370
    afzal imam
    Guest

    plz list out the internal & external alarm geneated by nokia flexiBTS

    #48371
    Pramod Kumar Singh
    Guest

    I want information about all alarm genrated by nokia bts (both external & internal)

    #48372
    Ravi
    Guest

    How many types of Alarams in Telecom Shelter

    #48373
    KJB
    Guest

    Hi Ghamiz.
    7706 is due to O&M link down of BTS.Kindly check Site may be down,or LAPD for OM signalling may be OFF.

    BCCH missing 7767 apears when BCCH TRX is down dou to any reason.

    Thx
    Kjb

    #48374
    Vincent
    Guest

    Good day Sirs, how to resolve this problem? On site there’s no active alarm but on NOC there’s a Recovery Action Failure, and sometimes HSDPA failure indicating cell A, yet we’ve already replaced the FRGC module where cell A is located.

    Please help me with this. Tnx

    #48375
    Vincent
    Guest

    Sir Geoff about this sleeping cell issue, does 3G/HSDPA had this also? Thank you..

    >>>>>>
    Nokia have a sleeping cell issue in S11.5, which is fixed in CD 4 I think (we are now on CD10) Many BTS’s report 7738 alarm (first supp info field will tell you if this is as SD/TCH/GPRS issue or combination of the 3) This issue is resolved by swapover of BCSU. Currently we have see an issue with 7738 alarms (again related to BCSU) following automatic recovery action of a bcsu, in this case all effected BTS’s require reset to resolve. Also it could be that your BTS is supervised 24 hrs a day (ZEEO:SUP;) and you genuinely have no traffic. In this case your supervision parameters need adjustment.

    #48376
    Ghamiz
    Guest

    Thanks KJB for the reply. Kindly tell what steps can be taken remotely remedy?

    #48377
    jack
    Guest

    hi Vincent.
    it seems that you are expert in NOKIA BSC 3i.
    i have one important question.

    1.in NOKIA BSC 3i we have an extension of service terminal named:RCBUGG

    with this extension we can replace the MML commands in the US command group (Working State
    and Restart Handling) in situations in which the OMU is not in use and the
    MML commands cannot be executed.
    i want to know step to step which commands should apply for this ???

    2-can we measure VSWR without the help of site master/spectrum analyzar??
    please some on expert in NOKIA BSC3i explain it for me step to step.

    thank u

    #48378
    prit
    Guest

    hi,what is full ,half,dual rate call in gsm.pls explain in brief ….

    #48379
    Ish
    Guest

    Reasons for High TCH drop, though the DCR is low, no alarms. can any1 suggest me which parameter to look into n do optimization accordingly.

    #48380
    sanchit jain
    Guest

    can anyone tell me how many types of alarms are there in gsm site???
    please list out all the internal and signalling or any other alarms???

    #48381
    Rajratna
    Guest

    Do we get any alarm when BCCH TRX comes up after claring BCCH Missing alarm?

    #48382
    mansisharma905@gmail.com
    Guest

    hello,
    if anyone can solve my problem i have to prepare a project inbts alarm monitoring &ihave no clue ,no idea can anyone send mea sample project sothat ican find iteasy to make currently i have just passed B.TECH 3RD YEAR
    ITS QUITE URGENT

Viewing 15 posts - 16 through 30 (of 75 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.