Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

What is 2+2+2 or 4+4+4?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
  • #48342

    Can anyone explain what 2+2+2 or 4+4+4 is and how it is derived?
    Also explain what a 1+1 Hot standby is?



    Hi Stephan,

    2+2+2 or 4+4+4 is the site configuration i-e no. of radios.

    2+2+2 is the three sector site having 2 radio in each sector.



    Hello Lvin,

    2+2+2 = a BTS with 3 sectors, each sector with 2 TRX.

    4+4+4 = a BTS with 3 sectors, each sector with 4 TRX.

    1+1 = a BTS with 2 sectors, each sector with 1 TRX.
    I don’t know what is hot standby.


    Geet Mukhra

    Hi Stephan,
    I guess you are talking about M/w when you say 1+1 Hot standby.Basically it is a protection tecnique where we can protect the M/w hop by placing two radios and one dish in either side.

    nutan pant

    Hi Stephen,
    as pix has already explained to you but still i am adding some details.
    2+2+2 is the BTS configuration and this configuration deepends on your available freqencies N better available hoping freqqencies.You cant configure your BTS according to your needs but you have boundations. say for example you have 10 frequencies in hoping so there are total 13 freqencies(10+ 3 BCCH freq.)so now the max no of total TRU in all 3 sectors cant be more then 13. you can choose the different sets as 4+4+5, 5+5+3,3+3+7 etc.

    I too dont know 1+1 hot standby,
    it might be releted with the micros with 2 sectors but both the sectors same BCCH.
    Please let me know if u get the answer for this hot standbye?

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.