Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

MFRMS

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #48317
    Multiframed
    Guest

    Hi, what is impact of reducing or increasing the MFRMS parameter (number of multiframes) for a cell on paging performance. has it anything to do with the BTS queuing etc??

    #48318
    INDRANIL
    Guest

    Increasing MFRMS(no. of Multiframes between paging), will summon no. of paging groups increasing that’ll create delay in call set-up time as Mobile has to wait for paging group for long time.[formul for No. of paging group N:=(9-noofblocksforAccessGrant)*MFRMS[for non-BCCH combined].
    Paging group N:(IMSI mod 1000)mod N.//that means N is proportional
    MFRMS].
    if MFRMS decreases no. of paging group will decrease & then no. of IMSI in one paging group will increase.Increasing MFRMS will also reduce cell reselection sensitivity but saves lot of battery power of MS.

    cheers//

    #48319
    Salvador
    Guest

    what is the impact of having different paging groups in one single LAC?

    example:
    In LAC = 100

    I have 33 cells such that 18 cells having AG_Blocks = 3 and MFRS = 4,
    while the next 12 cells
    having AG_Blocks = 2 and MFRS = 4
    and 3 cells having AG_Blocks = 2 and MFRS = 5.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.