- This topic has 104 replies, 1 voice, and was last updated 6 years, 12 months ago by Sohaib.
14th February 2004 at 20:15 #33592Assem AsadGuest
Hi Waleed and every Body
About Calculating the capacity that the BTS can carry depends on the distribution of TRXs among cells of that BTS, for example if the BTS has a configuration of 3+3+4 the capacity will deffer from that of a configuration of 2+2+6 or 5+5 the reason is the way that the Erlang table calculates the capacity.
Assem17th February 2004 at 11:36 #33593girijaGuest
i am looking out for formula to calculate no.lines needed when BHT and blocking is given.15th March 2004 at 19:24 #33594farisGuest
please..anyone know about the following:
acceptable value of co-channel interference in GSM.
how do they measure co-channel interference..from base station to base station or what
whats we mean when we have A=55.3 erlang as example where A is traffic intensity
N=i^2 + j^2 + i*j..where N is cluster size and (i,j) are +ve
integers..how do we choose i and
j …is (i AND j)determine the
value of N or vice versa
plz reply me ASAP at firstname.lastname@example.org or here in this forum but i prefere in my email
i need this info too much
thx for all15th October 2004 at 10:08 #33595RAJINDER MOHAN SHARMAGuest
I want to calculate traffic in erlangs for a PSTN net work of equiped capicity 240758. and working connections 184560.
Ishall be great full if you please communicate at email@example.com
rajinder25th October 2004 at 17:49 #33596MAhmoodGuest
CAn any one differntiate b/w INAP and CAP ? Primitives as well.4th March 2005 at 03:53 #33597DorjiGuest
Can anyone tell me the difference in Phase sequence, i.e. normal and open
Thanks17th April 2005 at 12:21 #firstname.lastname@example.orgGuest
please any one knows where I can find traffic engineering litriture for mobile network5th January 2006 at 05:59 #33599MANOJ NEGIGuest
WHAT IS THE UNIT OF EARLANG?5th January 2006 at 09:28 #33600Tom H.Guest
Strictly speaking, it is a dimensionless measurement and represents the continuous use of one voice path.
In practice, the unit is an Erlang and is used to describe the total traffic volume of one hour.
Please see http://www.erlang.com/whatis.html for more information.17th May 2007 at 05:03 #33601victorGuest
please explain me if we use half rate on air interface no of calls will be double on the Abis interface??? will it be 1 bit sub channel in case of Half rate
urgent>>>>>17th May 2007 at 09:53 #33602PixGuest
In case of half rate, a cell can handle twice more calls than in full rate.
On Abis interface, one call will occupy half an Abis nibble instead of a full nibble.
Problem of capacity will occur on the BSC side, depending on your vendor. normally, the BSC board connected to the Abis’s (TSU in alcatel system) is only able to handle a certain amount of calls, regardless whether it is FR or HR. So if you double the number of calls on the Air interface, you need to double your capacity in TSU.
BSC with a more modern conception should be able to cope better with HR (cf. the latest generation “BSC Evolution” for Alcatel)
Regards,24th February 2009 at 11:39 #33603sharad bhattGuest
Somebody please explain how can we dimension the signaling links in TDM(both for LSL and HSL) and IP based networks.
Please let me know how can we get the bandwidth requirement for (1) TDM (2)IP
BR//Sharad14th April 2009 at 13:00 #33604JannyGuest
i need yours help, because i`m student of telecommunication and information technology enjiner, then i writing my bachelor diplom so i can`t compute my radio network planning project in erlang of 1 pcm would give how many erlang in its. please help me? my yahoo mail is email@example.com contact me!15th April 2009 at 02:57 #33605PanGuest
Look the top of this page. There you may find out reference to on-line version of Erlang calculator. You may type ‘blocking probability’ and number of lines in PCM (30 or 31) in appropriated fields and get the offered traffic (‘BHT’ parameter) value in third field for these conditions.15th April 2009 at 16:16 #33606InnovaGuest
My erlang calculator has been sitting idle for quite a while. Let me compute for you:
PCM = 30 channel for voice (1 circuit for signaling is assumed)
Blocking factor =0.01
Erlang of the PCM = 20.33