Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Cause value 31 in ISUP RELEASE MESSAGE

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #47793
    Sokchhorn( Cambodia)
    Guest

    hi all,

    can you tell me what are the cause to reject the call which in ISUP RELEASE message cause value 31?

    Routing Label:
    (DPC) Destination Point Code: 02069
    (OPC) Originating Point Code: 02014
    (SLS) Signalling Link Selection: 4
    (CIC) Circuit Identity Code : 0E4h = 0228dec = PCM: 7 TS: 4
    RELEASE
    Cause Indicators
    coding standard : CCITT standard
    Location : 3 = transit network
    cause value : 31 = normal event – normal – unspecified

    #47794
    ero
    Guest

    This cause is used to report a normal event only when no other cause in the normal class applies.

    #47795
    Igoen
    Guest

    What kind of event that is categorized normal in this case? Are there any example events?

    #47796
    Stefanus Enggar P
    Guest

    Hi there,i also have have a problems with cause value 31..Actually what is the cause of this problem?

    #105874
    Joseph Chidanyika
    Guest

    Cause 31 is kinda associated with interoperability issues. For example when two local networks are using different mechanisms (routing tables, numbering plan, different bearers ( for example one is using a circuit & packet switched 3G network and the other an entirely packet switched 3.75G network with an IP-based Gb interface)

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.