Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Checking of incorrect antenna/TRX connec

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #47543
    Ivan
    Guest

    Does anybody know how to check the correctness of sector antennas/trx connection?
    Probably there was incorrect connections in two sectors – 2 and 3. By means of TEMS drive test? Switch of/in sectors …
    Antenna is a cross polarized with two feeders.

    #47544
    Pix
    Guest

    Ivan,

    The procedure is to lock each of the TRX one by one, in turn, and perform a call setup on each TRX of each sector. You will see if there is a difference in RXLEV among the several TRXs within the same sector.

    If there is a big difference : the TRX is actually belonging to another sector…

    Repeat the procedure for each sector…

    Regards,

    #47545
    patrick.fr
    Guest

    without turn arround your site =>

    Have you got trace mobile?

    You place your trace mobile phone on the antenna.

    You get first with MAIN and after DIV.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.