Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PABX

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #33462
    john
    Guest

    We have a got a nortel 81c EPABX.It has two LAN ports.Can I telnet to the EPABX and do system management remotely from the LAN ?

    #33463
    dmck
    Guest

    I have connected the AUX port of CISCO routers to the rs232 maintennace port of Nortel EPAX and telnet to the aux port. I successfully use this method on an international WAN

    #33464
    John
    Guest

    Yeah that’s fine but what about directly from the LAN

    #33465
    James
    Guest

    John,

    I have done this slightly differently but to the same effect. Using MSDL serial interface cards (which use a standard RS232 output despite what the manual says), and connecting to a terminal server. Telnet to the IP address and port number of the terminal server (create a new port number ie not 23) – this will do the trick. I have done this on a number of occasions but terminal servers can be expensive. This is a good solution if you have a number of switches. ALso if you are call loggin you can use terminal servers for the same purpose.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.