Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

improve TBF drop rate

Viewing 15 posts - 31 through 45 (of 62 total)
  • Author
    Posts
  • #47377
    MANOJ
    Guest

    What we have to do improve TBF drop, when suggested has applied.

    For Nokia 1800 can improve 2 to 3 % TBF drop if KPI is 90%

    #47378
    ANAND AGARWAL (INDIA)
    Guest

    What is a TBF drop.

    DOES TBF DROP MEANS TEMPORARY drop in Packet data connection and same is resumed again. However subscriber will not face drop in connection.

    If yes than is it drop at Air Interface/abis/Gb.

    Is it related to TCH drop.

    If not than what are the reasons for a TBF Drop in NSN BSS.

    #47379
    pix
    Guest

    hi anand,

    TBF drop means the user looses throughput for a while (few seconds), but that’s usually enough to stop the ftp transfer or prevent the webpage from being displayed fully. So yes, in the end, a tbf drop is impacting the subscriber experience.

    It is mostly due to radio problems (interference, coverage, mobility…), but other reasons can happen : PCU software failure, TCH traffic preempting the TBF’s radio timeslots, or abis/ater failures. The failure of the Gb interface does not impact the TBF drop (but the Gb should never fail, anyway).

    If it is a DL drop, the PCU will establish a new TBF for that MS in order to retransmit the data. But as I said above, it is probably too late for the MS : the webpage or the download is already stopped.

    If it is a UL drop, the MS is not obligated to establish the UL TBF again. It is up to the subscriber it establish it again.

    Regards
    pix

    #47380
    bill
    Guest

    what should be the target value of tbf drop rate? and how can we improve it?

    #47381
    sudhar
    Guest

    what is the best value for N3101,N3105

    #47382
    Abhijit
    Guest

    Can any one tell me what is PCU Reject?
    What is the process to stop this rejection?

    Please Help me…

    #47383
    bill
    Guest

    i need to improve my nw tbf drop rate, vendor is siemens, current value is b/w 6–8, i need to improve it to 03–04, what should i do? :S

    #47384
    surendra yadav
    Guest

    i want to know that what is the impact of tbf rejection on DL_mas

    #47385
    TAPAL ROY BASUNIA
    Guest

    HOW WE IMPROVE TBF SUCCESS RATE IN 2G ,DATA KPI…NOKIA SYSTEM

    #47386
    Guru
    Guest

    Setting the higher value for dynamic setting also result high TBF drop

    #47387
    manish
    Guest

    please provide four reason to improve TBF SUCESS RATE,

    I AM USIN NOKIA EYESPOT SERVER FOR KPI.

    #47388
    ouchfa
    Guest

    what is the stagnat drop, reallocation drop?
    please, can you explaine how to reduce the tbf fail and tbf drop, for each cause of drop or fail,, thanks

    #47389
    parth
    Guest

    Hi,
    System is NSN.Having high TBF Drops in all the BSCs(around 4%-5%).Extended UL TBF is enabled and is mandatory.Please suggest parametric changes to bring it down to < 1%.Activities already done were as follows:: 1.Increased CDED 2.Increased CDEF 3.Changed settings of alpha & gamma 4.Increased RRH values Main observation is that TBF Drop due to Flush and MS no response is high.Please suggest urgently. Rgds

    #47390
    parth
    Guest

    Hi Can any one please respond to my query?

    #47391
    pix
    Guest

    for the FLUSH ->
    – identify the TIMER_FLUSH in NSN, and increase its value.
    – activate NC2 in order to reduce the number of cell reselections
    – push data transfers to the 3G layer 🙂

    for the MS NO RESPONSE ->
    This encompasses several possible causes. Are they mostly occuring during UL or in DL TBF ?
    But let’s focus on MS NO RESPONSE due to “POOR RADIO” conditions. In such cases, you want to make the data transfer less sensitive to poor radio conditions. A good way to do that is to:
    1/ reduce MCS usage (from MCS9 to MCS6 for example)
    2/ activate IRQ in DL and UL
    3/ reduce inactivity timers (less time in TBF = less chances to drop !)

    Regards,
    pix

Viewing 15 posts - 31 through 45 (of 62 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.