Generic selectors
Exact matches only
Search in title
Search in content

mapinfo tools

Viewing 15 posts - 1 through 15 (of 25 total)
  • Author
    Posts
  • #47258 Reply
    Adeel
    Guest

    hi, i was looking into mapinfo tools and i found ‘piano’ tool there. i found that we can also check the neighbor relations using this tool, and there was also a button named as ‘display QoS’.
    My question is how can we use this tool to display the neighbors and what is ‘display QoS’. what is the format of the neighbor file that this tool uses. can anyone help me??

    #47259 Reply
    Pix
    Guest

    long time i didn’t use piano… maybe you can try asking their RSC team (= RNE), i you have good contacts…

    #47260 Reply
    Csidor
    Guest

    Hi all,Does any body knows how to display neighbor relation on mapinfo?

    #47261 Reply
    Bhanu Pratap Singh
    Guest

    Site Name SITE ID CLID BCCH ori BSIC NCC BCC MA-LIST MAIO-1 MAIO-2 MAIO-3 HSN Bldg ht GSM pole ht AZIMUT GSM Ant. Type Mech tilt Elect-tilt Total Tilt Lon Lat SITE ADDRESS Max_tx_bts CU2 CU3 CU4 CU5 CU6 CU7 CU8 length
    Hi Adeel this is the format, you have to give ur details in this format in excel to create piano file.ORI here means your BCCH(1-124), Piano only takes 900 MHZ band channels, so if u r using 1800, then map ur channels accordingly

    #47262 Reply
    Marcos
    Guest

    hi all.
    could you tell me where can I find “Piano” or some tool similar.
    I would like to have some tool which permit me to wiew neighbor cells and reuses.
    I was looking for “piano tool” on the web but i could not find anything.
    bye

    #47263 Reply
    pix
    Guest

    hi marcos,

    i think piano is an old internal tool (from alcatel ?), not intended to be available for operators.

    if you have some contacts with radio engineers, they should give you the tool quite easily 🙂

    #47264 Reply
    emre iğrek
    Guest

    ok pix i need radio engineers 😀
    could you supply it .

    #47265 Reply
    pix
    Guest

    no sorry..

    #47266 Reply
    marvel
    Guest

    hi adeel,

    i think your “piano” and “display Qos” was in house tools that means developed for specific vendor/activity. If you interest, you could study about map basic programming.

    appreciate,
    marvel

    #47267 Reply
    hesam
    Guest

    hi guys
    i need advice and help somebody that help me live about mapinfo and how can i use this tool for planning and optimization ? if anybody there contact me
    hmh.eng79@hotmail.com

    #47268 Reply
    mint
    Guest

    hiii any one know the site data base format used in MINT (A UTITLITY IN MAPINFO)
    Tony

    #47269 Reply
    saif shabeeb
    Guest

    Kindly you can used MCOM TO DISPLAY THE NEIGHBOR

    #47270 Reply
    MRDE
    Guest

    Hi Csidor

    Piono is very old tool and well known but i can give you alternative and better that piano by name “TRF Tool”
    Write me murad.azizov@gmail.com

    #47271 Reply
    Jeff
    Guest

    Hi guys,
    Can someone explain the data input type and format to be used for “TRF Tool”?
    I don’t know how to create database and generally using the tool.
    Thank you

    #47272 Reply
    Jeff
    Guest

    What about this below post. Anybody with a help?

Viewing 15 posts - 1 through 15 (of 25 total)
Reply To: Reply #47268 in mapinfo tools
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">