Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

sdcch drop & tch drop

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #47220
    praveen
    Guest

    region for drop of sdcch & tch

    #47221
    Pix
    Guest

    Is this a tricky question ?

    #47222
    Harminder Paul
    Guest

    How much is the capacity of 1SDCCH/8 and 1SDCCH/4

    Urget…

    #47223
    Pix
    Guest

    check your erlang table :
    SDCCH/8 = 8 channels
    SDCCH/4 = 4 channels

    depending on the blocking rate you choose, you’ll get your answer 🙂

    #47224
    John
    Guest

    Hi Praveen,
    Reason for SDCCH and TCH can be different in different network. Mainly reasons for TCH are high Timing advance, Bad quality of radio network, Bad link quality, interference, congestion and wrong mapping of PCM.

    #47225
    Karuna Kanta Nath
    Guest

    What are the main parameters to improved TCH assignement of if no congestion exist in the cells?

    #47226
    akuis
    Guest

    many

    #47227
    pix
    Guest

    if no congestion, it means it is a radio problem.
    therefore :
    better coverage
    better frequency planning
    declare all neighbours
    ensure cell reselect offset is not too high in your serving cell

    regards
    pix

    #47228
    Deepu
    Guest

    What is the main criteria to reduce high Timing Advance?..

    #47229
    suuny
    Guest

    TA drops happen if cell is shoting more than 32 km , so the solution depends on the coverge objective .
    If you really want to cover that far like hwy site then you need to set the cell to extended range .Of course everythng comes with a price so if you turnon extended range your capacity will cut in half
    IF the cell objective is less than 32 km then you should cut the coverge by tilting or/and by reducing the power

Viewing 10 posts - 1 through 10 (of 10 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.