Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

8150 FAULT IN UNIT – Nokia – Ultra

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #47064
    Patrick.fr
    Guest

    BSC BCF-035 COMM 2007-02-19 16:17:27.94
    *** ALARM
    TRE -001
    (12145) 8150 FAULT IN UNIT
    UltraSiteBTSHub FXC E1/T1 Symm Unit
    02 4080d 01 5d

    I have this alarm on all of FXC E1/T1 which are the software E or superior.

    I have no alarm with software D or inferior.

    Do you have the same problem? Do you have a solution?

    There is no impact only critical alarm.

    thx.

    #47065
    Neeraj
    Guest

    Hi patrick,
    pls check ur software compatibility of transmission units and the the BTS software…

    #47066
    Zayyat
    Guest

    Try to relocate the unit to another slot if the alarm appears agin check the backplane!!

    #47067
    Patrick.fr
    Guest

    The problem is only on FXC with sotware **.E or **.F

    With lower version, there is no alarm. (**.D1)

    Nokia install this new version on new card.

    This alarm is not important (no cut traffic) without it appears critical there on OMC.

    Who has the same problem?

    #47068
    sebose
    Guest

    i have the same problem since nokia upgrade bsc to sw cx40 on 13/12/2007

    how i do for force the sw in lower version

    #47069
    patrick.fr
    Guest

    Stay with last SW version.

    We decided to inhibe this alarm.

    FXC => alarm properties to inhibe.

    This alarm used only with synchro extern. If you use PCM synchronisation, you can inhibe.

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.