Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TCH Assignment Failure

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #47013
    Rajiv Gujral
    Guest

    Hi
    I am facing high TCH-ASFR in one of the cell and in the trace im getting “Error Indication: RLM Cause: 13 SABM command, multiple frame established state”. In this cell i have changed the TRX, CDU, Fedder, CMM. Also i have not found any BER on PCM on abis interface. This problem arises at a sudden. Please help me out in solving the probkem.
    Reply will be appreciated.

    #47014
    Rajiv Gujral
    Guest

    Also i have found in the trace that the release and disconnect cause is : “Cause:47. Resource unavailable, unspecified. There is no congestion in the cell.

    #47015
    Pavel
    Guest

    Which vendor are you using?
    Which TCH type are defined at cell(FR , HR, AMR)?
    Check A-bis definition, may be there is mismatch in A-bs definition at BSC side.

    #47016
    Rajiv Gujral
    Guest

    Thanx Pavel for ur reply.
    Vendor is ZTE and TCH type is FR.
    There is no mistach in the A-bis definition at BSC side. I have alerady compared our ZDB database for the mismatch.
    Can u tell me what is the meaning of the “Cause:47. Resource unavailable, unspecified”.

    Regards

    #47017
    Rajiv Gujral
    Guest

    Please let me know what elsei can do to solve dis case.

    #47018
    vivek
    Guest

    dear all,
    can nybody please tell me what is synchronous & asynchronous handovers.

    #47019
    Pix
    Guest

    Hi Vivek,

    In GSM ?
    Sync. HO are performed between two cells sharing the same clock (or having the same “synchronization”).

    It always happens between two sectors of one BTS.
    It’s never the case between two cells belonging to different BTS (therefore a asynch. HO is performed).

    sync HO are a bit faster than async HO

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.