Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Q3-attribute in GSM

  • This topic has 1 reply, 1 voice, and was last updated 17 years ago by Pix.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #46926
    INDRANIL GHOSH
    Guest

    Hi pix,

    i m working in Nortel OMCR(GSM), I am facing an alarm after
    doing audit-BDA in one BSC—
    —>The alarm is:”Error on non Q3
    attribute”
    Pls share knowledge regarding this.

    cheers//
    Indranil Ghosh.

    #46927
    Pix
    Guest

    Hello Indranil,

    As far as i know, Q3 is a standard language that allows two machines to talk. It is especially usefull to make the OMCR communicate with a NMC for instance, or with an external module.

    So your error actually means : “error on something i’m not being able to read”

    What you could do is check your Q3 interface (Q3 is customizable, maybe someone modified an attribute by mistake)

    Good luck,
    Pix

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.