Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

UMTS

  • This topic has 5 replies, 1 voice, and was last updated 17 years ago by Gito Prastomo.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #46892
    Gito Prastomo
    Guest

    Hi All,

    Any body could explain about the paging capacity which could carry on Paging Message over Radio Interface in UMTS Network?
    Like CCCH capacity in GSM Network..

    Thankyou

    #46893
    Gito Prastomo
    Guest

    How many paging/hour that could carry in paging message?

    #46894
    Joni Niak
    Guest

    Hi,

    Anyone know any Nokia 3G Report / 3G Counter from which I can get Timing Advance??, Like Report 232 (Nokia) in 2G.

    Logically it should be there, (I am not sure).

    BR

    Joni R.

    #46895
    GIto Prastomo
    Guest

    Hi Joni,

    I dont see that there is Timing Advance in 3G. In 2G TA is used to synchronize the timing during handover non synchronize.
    If the handover is synchronize, the TA is not sent on the message, then HO access will be sent 4 times

    #46896
    Pix
    Guest

    Gito,

    The timing advance is not only used for HO. It’s mostly used so that the burst sent by the MS falls within the timeslot it has been allocated by the BTS.

    For 3G, i don’t know…

    #46897
    Gito Prastomo
    Guest

    Yes Pix

    Thank you

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.