Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SDCCH Blocking calculation

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #46327
    Balky
    Guest

    Hi All,
    Is there anybody to know how I can calculate the SDCCH Blocking rate for Alcatel_B9.Which counters I should use, because there are a lot ?
    Thank you in advance…

    #46328
    sazzy
    Guest

    what is formulae of sdcch blocking ratio and sdcch drop ratio

    #46329
    pix
    Guest

    hello sazzy,

    next time, try to use these words in your post : “please”, “thank you”

    sdcch blocking rate = (sdcch requests – sdcch assignments) / sdcch requests

    sdcch drop rate = sdcch drops / sdcch assignment success (= sdcch seized)

    #46330
    merajul
    Guest

    Dear pix,
    how sd block is affected with hardware.

    #46331
    Meraj
    Guest

    Dear All,
    If call is zero and SD blocking is high wt could be the reason for that.please suggest me…

    #46332
    Bijoy
    Guest

    Hi Meraj
    What is your vendor??

    Br\\
    Bijoy

    #46333
    meraj
    Guest

    Dear Bijoy,
    My vendor is Alcatel-Lucent.Thankx Meraj.

    #46334
    Pix
    Guest

    Owww, that’s for me then…

    It looks like a HW issue or a configuration issue. Check/reset/replace your TRXs,…

    Do you have similar issues on other cells ? After a reset, the problem is still here ?
    Did it appear suddenly ?
    Or was it here since the fist commisionning ?

    -pix

    #46335
    Meraj
    Guest

    Dear Pix,
    From the commisioning day and we found that most of the sites either in lac boundary or stand alone.

    Thankx
    Meraj

    #46336
    Pix
    Guest

    I think you should ask for ALU support. If the sites are newly deployed, you probably bought some support from ALU as well. So check with them.
    I suspect wrong configuration of the sites…

    pix

    #46337
    imran
    Guest

    hello everybody,

    My site is overshooting upto 34 kms due to which there is sd and tch drops,i changed the effective tilt also but not getting resolution.

    please help

    thanks

    #46338
    pix
    Guest

    hi,

    what is the terrain topology like ?
    reduce antenna height ?
    change azimuth ?
    change antenna (narrower beamwidth, les secondary lobes)

    if nothing works, you’ll have to decrease the tx power of the bts.

    regards
    pix

Viewing 12 posts - 1 through 12 (of 12 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.