Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

IDEAL MODE MEASUREMENTS

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #46234
    RF LEARNER
    Guest

    HI ALL,

    KINDLY CONFIRM ME THE PROCESS OF… HOW MS SENDS MEASUREMENT TO BTS.

    KIND CONCERN. I GOT CONFUSED…

    THANKS IN ADVANCE

    RF LEARNER

    #46235
    pix
    Guest

    the measurement results ?
    it is a message which is send every sacch during the call phase (and every 5 seconds in idle mode, approx), and which contains dl rxlev, dl rxqual, ms power, dl rxlev of n-cells and few other measurements.

    #46236
    rf learner
    Guest

    HI Pix

    Is it during call phase?

    After every SAACH but which channel is used in UPLINK…..

    But how them ICM is performed.

    thanks

    rf learner

    #46237
    yogesh_rf
    Guest

    hi RF,
    for traffic channel TCH multiframes are transmitted,1TCH multiframe(120 ms) =26 TDMA frames,out of which in 24TDMA TCH frames,data is transmitted,and 1TDMA frame is used for SACCH(for power control measurements sent by MS to BTS)AND 1 tdma frame is used for IDLE neighbour RXlev measurements rpts.sent by MS in Uplink.normally after 4 SACCH frames means after 480 ms,power Decrease or increase command is given to BSS.

    BR//
    yogesh_rf

    #46238
    pix
    Guest

    rf learner,

    i guess you had your answers all right by now ? sorry about the delay 🙂

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.