Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SDCCH Loss rate

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #45914
    man
    Guest

    What happens if you increase T200 timer wait period to a larger value.What parameter will it affect adversely(will go bad)

    #45915
    yogesh_rf
    Guest

    hi man,
    T 200 is basically for air link between MS and BTS,nw it normally expires in case of high interference and high TA and ur radio parameters will cm BAD,so if u increase the value then customer will lose RF link in more time and speech quality will degrades….. and so on.

    #45916
    Nishant
    Guest

    Hi
    In our Network after increasing the T200 timer ,the SD completion rate has improved very much.Can anybody explain me how this has happened.
    and also if we increase the T200 timer does it affect Signalling load.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.