- This topic has 1 reply, 1 voice, and was last updated 17 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
how can i come to know nokia bts is working in rx clock or internal timing?
On ultrasite, HUBMANAGER, menu synchronisation
You configure like that:
priority 1 = Rx clock
priority 2 = Internal timingon the left, you have active source.
If your BTS is not on your network, only on the internal timing, you have an alarm like synchronisation or frequency
Viewing 2 posts - 1 through 2 (of 2 total)
- The forum ‘Telecom Design’ is closed to new topics and replies.
