Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Huawei BTS312

Viewing 8 posts - 16 through 23 (of 23 total)
  • Author
    Posts
  • #45735
    billel
    Guest

    hi Md. Fazlul Haque – 29 Jun 2009
    how we will control the trx power at BTS312 ?
    you can also use the parameter Fine Tuning of Static TRX its use to tune the power of the trx by small value

    #45736
    ALex_R
    Guest

    u can control TRX power by
    cell attribute/ TRX config/ device attribute/ power level
    0 means max power, 1 is less than max power by 2 dB

    #45737
    akter
    Guest

    how we will control the trx power at BTS312? and I want to know the details of BTS312 in hauawei.

    #45738
    Vinay Bajaj
    Guest

    One of the problem occurs in the NOKIA 1110 that in manual search we are not able to find the coverage area but when we go for automatic search then coverage in that mobile come automatically. so can anybody tell me what are the reason behind this?

    #45739
    billel
    Guest

    HI Billel show the difference the best value of that BTS to have a better coverage
    Thanks

    #45740
    NJ
    Guest

    Hi all,

    I ve used the DMLC card with DB44 ports to create external alarm on Huawei 3012AE, I set the value of clock parameter1 to 255 on Data auto configuration (Modify site data,M2000)when I test the cable (loop) I ve 8 alarms but my problem is how to raname these alarms from Boolean X alarm to for ex: AC main Failure, DC low…

    Thanks for support.

    NJ

    #45741
    HAMZA
    Guest

    I HAVE A BOOLEAN 1 ALARM WHAT I CAN DO TO REMOVE IT PLZ

    #45742
    NJ
    Guest

    Hi Hamza,
    U can remove it by modifying site data parameter from data auto configuration.

Viewing 8 posts - 16 through 23 (of 23 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.