Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BSS

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #45093
    Jeff
    Guest

    Hi,
    we have a problem in our network,located on all sites from one BSC.
    All comminication`are chopped for such as we lose some words.
    We made a rest of the bsc and nothing has changed.
    I think about BSC elements, but I don’t know where to start as there is no alarm.It’s Nortel equipment.
    Have you got any idea?
    Thks,

    #45094
    Naren
    Guest

    1) Check the DTX..It might be enabled.Try to disable on 1 cell and Try
    2) Try restarting your trau modules

    #45095
    Jeff
    Guest

    Thanks for your advices.
    In fact,we know that there is also the same problem at our competitor network.
    So,now we investigate in the army that trains nowadays around our island.

    #45096
    Jeff
    Guest

    There is still the same problem and we also hear some bip,have one way communication and drop calls.
    We have reset the BSC-no result-,then switched the IEM-no result- and also resEt the TCU-no result-.
    Areal nightmare.
    Should we reset the MSC???
    What do you think about this problem?

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.