- This topic is empty.
17th May 2006 at 05:21 #45005TufailGuest
if any body among u can provide me some parameters related to Eric BSC.
Thanx in advance
Tufail18th May 2006 at 15:55 #45006Wireless GuyGuest
You need to be specific:
Floor loading?19th May 2006 at 04:54 #45007TufailGuest
Thanx for ur reply
actually i need to know parameters abt cell, Nbr Cell, Handover, power control
I am an RF Engineer, i have worked on Nokia but now i am working for Ericsson and i dont recognised ther paramter, since the paramter work similarly, thus i need a guide for BSS ericsson parameter.
thankful for ur helping nature.
if u want to email me my Email ID is Tufial@gmail.com
thanx in advance
Tufail29th May 2006 at 04:59 #45008tufailGuest
is here no a single person h can provide me some parameter related to Eric BSC29th May 2006 at 08:36 #45009waleed1111Guest
all BSC parameters of ERICSSON BSC can be found in Alex library29th May 2006 at 11:54 #45010jhonclaireGuest
hi, can anybody help me about handover parameter adjustment in ericsson. indoor cell can’t handover to outdoor cell, bcoz outdoor are too weak to trigger handover. i’ve already reduce the output power of the BTS. what parameters do i need to adjust to initiate handover?
thank in advance for the help…
jhonclaire29th May 2006 at 20:51 #45011JeffGuest
To trigger Ho to a weak cell,you can decrease the lRxLevDLH(Cell parameter) of the indoor and also decrease the HoMarginRxLev from the indoor to the oudoor cell you want to reach;that will make easier Ho to the outdoor.30th May 2006 at 02:49 #45012jhonclaireGuest
thankx for the reply, the equipment is Ericsson, HoMarginRxlev is for Nokia, am i right? what is its equivalent parameters in ericsson?
thnx again in advance.
jhonclaire30th May 2006 at 09:38 #45013tufailGuest
i dnt hav alex… if there is any doc abt da parameters n if u have it… plz, i need tht.
Tufial@gmail.com3rd June 2006 at 13:16 #45014BoutoutaGuest
dear all i have lots of data about ericsson rbs ééà- but i need to exchange it with nokia wcdma bts
e mail: email@example.com
zbest luck for all6th June 2006 at 10:23 #45015@zizGuest
hi tufail please can i know why did u left nokia????7th June 2006 at 07:26 #45016TufailGuest
I left tht becoz i was outsourced.
tufail7th February 2007 at 02:48 #45017RoyGuest
Hi Guys I’m BSS engineer from Indonesia I’m having a problem with indoor instalation using RBS2206 with 6/0/0 indoor configuration using a combiner that combines 3 RXD with 2 Output to antennas,I’m being confused with the RXD parameter at BSC that always gives RX DIVERSITY LOST since I give the RX parameter to RXD=AB, is there any idea of this, did I set wrong for this configuration, thanks in advance23rd September 2009 at 10:55 #45018moradinejadGuest
please send me Ericsson BSS parameters in GSM mobile communication.8th March 2010 at 10:10 #45019mamineGuest
you have to do a training about your request before accepting that job!!!!!!!