Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Silence Call

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #44669
    RF
    Guest

    dear All
    we have silence during the call , and its happend sometimes ,
    when you are calling you can’t hear ,and when they call you , you can’t hear
    so please advice

    #44670
    james
    Guest

    check A-ter interface

    #44671
    RAMI
    Guest

    Dear RF,
    I guess it is something related to CIC, circuit identification codes.

    #44672
    gag
    Guest

    It might be a patching issue

    #44673
    Fabio
    Guest

    RF,

    It seems like you may have some troubles with one of yours TRAU´s modules.

    Try to block one TRAU module at a time to check them all.

    #44674
    Nguyen Quang Minh
    Guest

    According to me, there’s some thing wrong with the E1 links between the BSC and TRAU module, please lock and try to check them all.

    #44675
    kapil joshi
    Guest

    silence during the call in a EWSD switch can be a far end SDH port malfunctioning however most of the times its CIC mismatch, try changing far end SDH port ,if CICs are ok.

    #44676
    Tanmay
    Guest

    Hi RF
    This problem of urs is due to the CIC mismatch as suggested by Kapil, to check it you can ask MSC guy to block a particular CIC, / check the corresponding LED of the ET card in TCSM, there u must get a break.

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.