Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

EDGE and GPRS

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #44273
    Arindam
    Guest

    HI,
    Is anybody using 8-PSK modulation on the BCCH TRX?? There guys from ETSI clearly acknowledging, that using 8-PSK can affect neighbor cell measurement for MS in other cells.This is because of the fact that Time Slot using 8-PSK has generally 2-4dB lower power than the one using GMSK.

    Has anybody implemented 8-PSK on BCCH ans seen it’s impact ??

    #44274
    Boko
    Guest

    We are using 8-PSK only on BCCH as this is the freq with less interference and no power control. The neighboring slots of the BCCH 1,7 are not using 8-PSK.
    We have no problems at this point.
    Where you saw this about ETSI. I have to check but I think Siemens recommend EDGE CU to be the BCCH one.

    #44275
    Arindam Dey
    Guest

    Hi There,
    Well, here are the two links you can check…
    http://list.3gpp.org/scripts/wa.exe?A2=ind0209&L=3gpp_tsg_geran_wg1&D=0&T=0&P=466&D=1

    This one is a correspondence among 3GPP members . You can also check page 93 in Siemens Document titled GPRS/EGPRS Global Description.

    The next link discusses about EDGE in general

    http://www.commsdesign.com/design_corner/showArticle.jhtml?articleID=16505610. Unfortunately this link is down most of the time, but you can try.

    Arindam
    arindam_dey@yahoo.com

    #44276
    Loy65
    Guest

    Ask how long it will be before you can go back to work or start regular exercise again. ,

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.