Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Grade of service – recommended values

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #44170
    gsmrules
    Guest

    Hi everyone,

    for GSM networks,

    What GOS values are recommended for calculating trunk capacity in the following cases:

    – BTS-Mobile station
    – Abis interface
    – MSC – BSC
    – MSC – MSC
    – MSC – others PLMNs
    – MSC – PSTN

    Why should i use lower GOS values for internal network interworking (e.g. MSC-MSC or MSC-BSC)?

    Thanks in advance,

    #44171
    Boko
    Guest

    Just take a look not on the persentage but the raw numbers.
    0.1% out of 1000000 is 1000 MSC-MSC
    1% out of 1000 is 10 BTS-MS

    #44172
    gsmrules
    Guest

    Thanks for answering

    Ok, let me get this straight:

    It’s about calls quantity. Is not the same to allow blocking for 1000 calls than 10, that’s it?

    Thanks in advance

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.