Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

frequency planning

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #44021
    TUFAIL AHMAD
    Guest

    wat is 1X1, 1X2 etc in Frequency planning.. need help

    #44022
    Dimitar Kesov
    Guest

    hi, is this frequency planning for mobile network?

    #44023
    tufail
    Guest

    hi dimitar

    thanx for replying

    yes it is frequency planning for GSM 900

    n i think it is know as Ad hoc

    thanks n regrds
    tufail

    #44024
    TUFAIL AHMAD
    Guest

    hi all
    can anybody let me know wat is 1*1, 1*2… in frequency planning of mobile n/w.

    thanks

    #44025
    sdcch
    Guest

    hello TUFAIL AHMAD,

    i think it means concept of frequency planing in case of frequency hopping, for example 1×1 means that on every cells in area there is one set of frequencies (MA) on TCH DRXs. Of course,BCCH layer is ‘clear’.

    #44026
    tufail
    Guest

    thanx sdcch for ur reply

    can u tell me how many frequecies i need for 444 site for SFH using 1×1 tech.
    and also can u let me know abt wat is 1×2 in SFH.

    thanx n regards
    tufail

    #44027
    Boko
    Guest

    You don’t have to care about the number of sites/sectors but for the number of TRX’s per sector.
    Then you choose 1×3 or 1×1. 1×2 sounds strange although we use it in the micro layer.

    #44028
    jood
    Guest

    Generally the best # of freq (hopping set) to encounter any fading & average them over sufficient BW is 15 freq.
    — Cuz 15 freq = 200 kHz x 15 = (3 MHz).
    3 MHz is bigger than the coherence fading of outdoor & in car environment.
    But it’s not sufficient for indoor environment. Its it???.

    #44029
    TUFAIL AHMAD
    Guest

    thanks guys for ur help.

    i was thinking tht
    1×3 is one MA list for one sector n hence 3 for 3 sectors.

    regarding no. of frequecies

    i was thinking of it is % of channel occupancy tht need to be

    #44030
    yrrah
    Guest

    Hi TUFAIL,
    you are limited to a number of frequencies not to go under by the Frequency Load (FL).
    the FL is computed as follows:
    [(Nb of hopping TRX)/(Nb of frequencies in the hopping list)]*[Traffic/(Nb of voice available TCH)].
    The thresolds are the following:
    FL < 30% for 1*3 reuse pattern FL < 8% for 1*1 reuse pattern. In a previous message, you talk about ad hoc. Do you ahve any info about that, because i'm now facing problems with my network and i heard it could help a lot. Regards

    #44031
    TUFAIL AHMAD
    Guest

    thanks YRRAH
    tthis is a valuable information for your part.
    can you tell me how it is impklemented on Nokia systems.

    can you tell me more about this system, if you hav got material that can provide me with better knowledge abot this issu.

    My email ID is Tufial@gmail.com, can i hav ur email ID.

    YRRAH i am really sorry about Ad Hoc i really dont know anthing abt that.

    i 2 was searching for ad hoc but no one talked abt that.

    thanx n regards
    tufail

    #44032
    hashem
    Guest

    hi
    i am new on cell planner and can not do an automatic neighbor plan on my tool
    can you help abut that
    Best Regards

    Hashem.M.Hali

Viewing 12 posts - 1 through 12 (of 12 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.