Generic selectors
Exact matches only
Search in title
Search in content

Average traffic per subscriber

  • This topic is empty.
Viewing 15 posts - 46 through 60 (of 73 total)
  • Author
    Posts
  • #43782 Reply
    moh
    Guest

    how can i calculate MHT but not from Traffic volume

    #43783 Reply
    Rich
    Guest

    Hi,
    Can any one explain how to caculate convert Erlangs in to kbps.
    Cheers!

    #43784 Reply
    Pan
    Guest

    Hi Rich!
    It is very simple:)
    If you have a channel with 64 kbit/s (230400 kbit/h)throughput and your information source bitrate is 230400 kbit/h, then you can say that your source is creating load with 1 Erl intensity on that channel. Accordingly – 230400/2 = 0.5 Erl, 230400/4=0.25 Erl for this case.

    #43785 Reply
    Dennis Tham
    Guest

    Hi Pan,

    I thought 1 Erl = 64kbps and not 230400kbph

    #43786 Reply
    Pan
    Guest

    Hi, Dennis Tham !
    It is dependent for what time period you are averaged your load. Usually in telecommunications it is one hour.

    #43787 Reply
    Carlos
    Guest

    Hi professionals,
    the WCDMA system is a little different from GSM and others. In GSM, when you used to have problems with traffic demand, you really need to imply more TRXs. But in WCDMA the Transport network is very important and must be primarily verified. Suppose you have a growing traffic that is reaching the transmission BW, then the chosen QoS will be in charge of reducing this BW in order to keep loss and delay requirements. Then, my answer is that you must verify your system before start increasing HW.

    #43788 Reply
    Aakash
    Guest

    What is the capacity for a BTS in erlang for a GSM and a CDMA business seperately??

    #43789 Reply
    Dennis Tham
    Guest

    Hi Pan,

    Thanks for your insight. Yeah, I understand now, 64kbps = 64 x 60 x 60 kbph = 230400 kbph….

    Another question, do we actually consider the uplink or the downlink when we convert the Erl to kbps?

    #43790 Reply
    pix
    Guest

    dennis,

    usually, we consider only the downlink, because it is the direction in which there is the most traffic.

    so f the capacity is enough in DL, since it is symmetrical in DL and UL (capacity DL = capacity UL), it is plenty enough to carry the UL traffic.

    #43791 Reply
    J B Singh
    Guest

    hi
    how we can calculate IP bandwidth in kbps for 1 Erlang of voice traffic?

    #43792 Reply
    Valentin Georgiev
    Guest

    Hi,Singh.
    It depends on the coding you choose. Standart voice channel is using PCM(Pulse code modulation) with result 64 Kbps. But with other modulations you can lower the speed to 8-9 Kbps.

    #43793 Reply
    Debasish
    Guest

    How to measure the erlang used by the subscriber and to find the revenue earning of an operator?

    #43794 Reply
    TomTom
    Guest

    Hello,
    How much Erlang is for home user and for business user?

    #43795 Reply
    Sitha
    Guest

    I am wondering how to calculate the number of subscriber per BSC.
    **How to get the number of subscriber per BSC?

    #43796 Reply
    Bijoy
    Guest

    You can get this info in MSC as no. of attached sub/LAC

    Br\\
    Bijoy

Viewing 15 posts - 46 through 60 (of 73 total)
Reply To: Reply #43785 in Average traffic per subscriber
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">