- This topic has 16 replies, 1 voice, and was last updated 14 years, 7 months ago by iyan.
28th December 2005 at 14:54 #43501BokoGuest
Did anyone have experience with very low SQI, when using half rate codec with DTX in DL
Boko5th January 2006 at 23:28 #43502t28Guest
from what point of view ?6th January 2006 at 02:08 #43503RizGuest
I don’t know about it. I think Ericsson recommends using SQI. We use rx qual, instead. Also rx qual variations r faster.(ours is motorola network)
I’m eager to know the same.7th January 2006 at 10:42 #43504Nitin KhGuest
DTX on DL is not recommended with HALF RATE..As in already the bits the subscriber percieves are too low with Half rate channels. And with DTX on trasmission throughput goes even low. So the SQI goes low..??Its not the interference which lowers it..Its the actual throughput.. But what about PSQI ? Is it loww..???
I mean the percieved speech??
I would sriously like to know9th January 2006 at 10:14 #43505BokoGuest
We introduce recently DTX in DL with Half Rate. We made a lot of measurements with different equipments. With ASCOM QVoice we does not encounter any problems. But there is not much silence in the speech samples. With TEMS in perfect conditions (our lab) we have very low SQI (RxQual both SUB and FULL is 0). Also we listen to the speech and find no disturbance. Can anyone perform simillar test to confirm that SQI is not suitable for such measurements?
Boicho6th June 2006 at 10:20 #43506@zizGuest
hi all am a bss engineer at ericsson algeria and i would like know if someone have a help for T610 TEMS PHONE for ericsson.
thanks.7th June 2006 at 07:49 #43507TufailGuest
wat king of help u need for TEMS T610.
email@example.com June 2006 at 18:53 #43508pixGuest
i’m familiar with tems too, what’s your question ?22nd September 2006 at 10:03 #43509iyanGuest
can any body give me tems pocket view for t610 please…please22nd September 2006 at 14:14 #43510SammiGuest
hi Iyan…goto “more” on ur phone and click on ” pocket view ON”. there u can see all the parameters by scrolling the pages29th September 2006 at 10:38 #43511iyanGuest
yes thanks sammi
but i need the soft tems pocket view because in my phone not already installed can you send me please ….. 🙁29th September 2006 at 16:52 #43512PixGuest
a crack version of pocket tems ? i’vre never come across that… com’on, why can’t you purchase it from ericsson directly ?4th October 2006 at 08:28 #43513iyanGuest
i’m just litle student pix, who want to learn anythink but no money poor me … hik hik hik4th October 2006 at 17:18 #43514PixGuest
But a poor student doesn’t need tems for personnal usage 🙂 only a company can pay for it, it is about 15 000 to 20 000 US$.
i’m pretty sure you can develop your own drivetest tool using a nokia phone (symbian 60 possibilities are endless). Try to find the application called “FMT”, or network monitoring, for nokia phones.
I’m also almost sure you can extract some data from a alcatel phone (just type 000000* and you’ll reach a secret menu with radio measurements.5th October 2006 at 12:59 #43515iyanGuest
i will try…it
usualy i has try netmonitor from nokia phone
there is one question for you mr.pix,can you tell me what software the bsc or omc use???