Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BTS HARDWARE FAILURE

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #43244
    FERNANDO
    Guest

    Hi everybody, I only know a little bit about bts 2206(ERICSSON).I have a service denied and no accessibility problem but I guess that the problem lies in the bts harware. My question is how can I detect if the problem is a DTRU, CDU, OR DXU, ETC.? I´ll appreciate any comments…

    #43245
    alrazzak
    Guest

    Mr Fernando, i tell u about Huawei BTS. You can check power for CDU and LED flashing. Check led for TRX if not off fail condition. you
    can alos check TRX is lock or not by BSC.
    alrazzak

    #43246
    FERNANDO
    Guest

    Thanks Mr. Alrazzak, but I went to the site,I checked the DTRU and the led was on green, the output power was ok and the VCD(Voltage) was ok. Do you Know what measurement equipment shows a complete status of these HW and how could I see it?

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.