[RF Engr]

Dear All,

I have used the channel verification utility in TEMS and I have done it by writing the BCCH of the site and all the hopping frequencies. Then TEMS check the time slots. I want to know whether it checks all TRx TS’s or only one it has camped on at that time. So, if it checks all the TRx, then how i come to know which TRx it is using

[Bom]

I want to ask the same thing if any body can please tell me abt this

[Boko]

Hi,
“The Channel Verification utility allows you to check the availability of a set of traffic channels, typically those used in one cell or a set of cells. TEMS Investigation lets one or several TEMS mobiles make calls repeatedly on the chosen channels until all timeslots of interest have been tested.
Since there is no way for TEMS Investigation to control the timeslot allocation, traffic channel verification may take a non-trivial amount of time to complete. To reduce the testing time you can use several mobile stations”
You just open channel verification window add as many test cases as trxses you want to check.

[Author]

Posts