Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BTS NOKIA POWER CONSUMPTION

Viewing 15 posts - 76 through 90 (of 148 total)
  • Author
    Posts
  • #43005
    qomi
    Guest

    HI:please what is different card fx/c e1 and relation between units in bts nokia ultra band 900mhz or1800mhz?

    #43006
    Alan
    Guest

    Hi all, can some one tell me the step wise procedure to trouble shoot a down nokia ultrasite BTS? Have a nice day.:)

    #43007
    yellaiah
    Guest

    Dear Gomi,

    FXC E1 card is used for 75 ohm txn media and for this we have to use SMZ connectors,
    and
    FXC E1T1 card is used for 120 ohm txn media and for this we have to use TQ-Connectors).

    with regards
    gyellaiah@atspl.com

    #43008
    Ashok singh
    Guest

    Hi,There anybody can explain about a cross connection in Nokia Ultrasite bts and what kind of Quistion will put a interviewer coz i am going to give interview and i need a job please help me out there i will be very much thankfull to u .

    #43009
    Parag Gavhankar
    Guest

    hellow friends,
    i am facing one problem
    that i comission one site of(2+2+2), at there only 1 trx(which having BCCH)getting up but others r in rest mode (yellow led) and telecom partially working i tried with the change of ET port then also i am facing same problem.and BTS giving me trx failure alarm but there is no failure coz i change all equipments 2 times with bts cabinate too.
    even i said to NOC to recreate data then also my problem is not sorted out.

    so please guide me
    paraggavhankar@gmail.com

    #43010
    shaleen
    Guest

    hi parag
    i got u rpoint
    but tell me that in 2+2+2 config u have 3 sectors
    and u have stated that u have only 1 bcch trx
    what is the status of the trx in bsc
    and please give the description of the alarm
    there
    check there signalling also

    #43011
    Vanderley
    Guest

    I think that this is definetely a configuration error.

    #43012
    Mukesh
    Guest

    DAC value for Nokia Ultra bts is 2040 and for Metro is 2110.

    #43013
    Mohit
    Guest

    Please explain,how channel and signalling are working in GSM.

    #43014
    Mohit
    Guest

    Can anyboby explain wat is DAC?.and wat is EDAP and it’s useness in GSM. Please reply if u know.

    #43015
    aman
    Guest

    hi everybody
    can any body tell me what is the roll of splitter in the BTS and how much minimum frequency that is passes from the spilleter.

    #43016
    shaleen
    Guest

    hi mohit
    u have fired many question of good topic
    well first to start with is DAC and EDAP
    DAC is the value given to the BTS BOI card it is actually the clock count which require to synchronize with the external clock
    that means our BTS synchronize withthe help of the DAC value

    now
    EDAP is very much in significance with the EGPRS feature
    as with EDAP u can dedicate TS to handle the packet traffic so when we do Packet transfer then most of the traffic is hold by the EDAP slots and the rest of the STS of the trx where EDAP is defined can be used to handle other calls
    and witht he security point of view also it is beneficial

    try to go through its details on net if still there is any querry
    u r welcome to fire it here

    bye

    #43017
    Hasan
    Guest

    Hi
    Can anybody tell me one PCM can handle how many TRX in nokia BTS plz explane.

    #43018
    Mohit
    Guest

    Thanks shaleen,

    Mohit

    #43019
    Mohit
    Guest

    Anybody can explain following :

    1)Nokia Ultra BTS and metro BTS’s output power in watts and in db.

    2)Mobile station’s output power in watts and in db.

    3)one TRX’s output power in watt and db

    4)formula of power by which we can change db to watts .

    5)Beamwidth of GSM and MW antenna.

    Waiting for reply and would be thankful.

    Mohit

Viewing 15 posts - 76 through 90 (of 148 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.