- This topic has 147 replies, 1 voice, and was last updated 1 year, 7 months ago by MMK.
7th August 2006 at 06:03 #43005qomiGuest
HI:please what is different card fx/c e1 and relation between units in bts nokia ultra band 900mhz or1800mhz?13th August 2006 at 20:20 #43006AlanGuest
Hi all, can some one tell me the step wise procedure to trouble shoot a down nokia ultrasite BTS? Have a nice day.:)17th August 2006 at 12:33 #43007yellaiahGuest
FXC E1 card is used for 75 ohm txn media and for this we have to use SMZ connectors,
FXC E1T1 card is used for 120 ohm txn media and for this we have to use TQ-Connectors).
firstname.lastname@example.org August 2006 at 09:09 #43008Ashok singhGuest
Hi,There anybody can explain about a cross connection in Nokia Ultrasite bts and what kind of Quistion will put a interviewer coz i am going to give interview and i need a job please help me out there i will be very much thankfull to u .1st September 2006 at 06:25 #43009Parag GavhankarGuest
i am facing one problem
that i comission one site of(2+2+2), at there only 1 trx(which having BCCH)getting up but others r in rest mode (yellow led) and telecom partially working i tried with the change of ET port then also i am facing same problem.and BTS giving me trx failure alarm but there is no failure coz i change all equipments 2 times with bts cabinate too.
even i said to NOC to recreate data then also my problem is not sorted out.
so please guide me
email@example.com September 2006 at 06:49 #43010shaleenGuest
i got u rpoint
but tell me that in 2+2+2 config u have 3 sectors
and u have stated that u have only 1 bcch trx
what is the status of the trx in bsc
and please give the description of the alarm
check there signalling also1st September 2006 at 15:17 #43011VanderleyGuest
I think that this is definetely a configuration error.4th September 2006 at 08:10 #43012MukeshGuest
DAC value for Nokia Ultra bts is 2040 and for Metro is 2110.4th September 2006 at 08:14 #43013MohitGuest
Please explain,how channel and signalling are working in GSM.4th September 2006 at 08:22 #43014MohitGuest
Can anyboby explain wat is DAC?.and wat is EDAP and it’s useness in GSM. Please reply if u know.4th September 2006 at 12:51 #43015amanGuest
can any body tell me what is the roll of splitter in the BTS and how much minimum frequency that is passes from the spilleter.5th September 2006 at 07:09 #43016shaleenGuest
u have fired many question of good topic
well first to start with is DAC and EDAP
DAC is the value given to the BTS BOI card it is actually the clock count which require to synchronize with the external clock
that means our BTS synchronize withthe help of the DAC value
EDAP is very much in significance with the EGPRS feature
as with EDAP u can dedicate TS to handle the packet traffic so when we do Packet transfer then most of the traffic is hold by the EDAP slots and the rest of the STS of the trx where EDAP is defined can be used to handle other calls
and witht he security point of view also it is beneficial
try to go through its details on net if still there is any querry
u r welcome to fire it here
bye7th September 2006 at 05:41 #43017HasanGuest
Can anybody tell me one PCM can handle how many TRX in nokia BTS plz explane.8th September 2006 at 05:46 #43018MohitGuest
Mohit8th September 2006 at 06:07 #43019MohitGuest
Anybody can explain following :
1)Nokia Ultra BTS and metro BTS’s output power in watts and in db.
2)Mobile station’s output power in watts and in db.
3)one TRX’s output power in watt and db
4)formula of power by which we can change db to watts .
5)Beamwidth of GSM and MW antenna.
Waiting for reply and would be thankful.