Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

querries regarding NOKIA BTS Comm.

Viewing 15 posts - 121 through 135 (of 159 total)
  • Author
    Posts
  • #42588
    Geet Mukhra
    Guest

    Hi,
    In Nokia Ultra Bts ,one alarm “TRX TEST FAILED” is coming which has not cleared even now all trx are working in that BTS.
    I have given OMU reset to the BTS also but alarm is still coming.
    Can any one help me to clear the alarm?????

    #42589
    Geet Mukhra
    Guest

    Hi
    Can any one tell me how to clear “Beating BTS alarm” in NOKIA Ulta BTS??

    #42590
    kumar
    Guest

    Can any one tell me how can i checked sector handover when a site is working

    #42591
    Patrick
    Guest

    Geet Mukhra – 23 Feb 2007

    You can clear Beating BTS alarm with 2 solutions:

    Cancel alarm
    ZEOR:N°BCF:N° ALARM;
    Or
    Reset site
    ZEFR:N°bcf;

    under the word BEATING, you have a number which correspond to your alarm beating.

    Exemple:

    Beating BTS alarm
    7530

    => You have beating of alarm 7530 tx output level decreased.

    With ZEOH:date:hours:Bcf:; you see history of your site and all alarm which “beating”

    Beating BTS alarm exist also with City talk.

    #42592
    patrick
    Guest

    Geet Mukhra – 23 Feb 2007

    TRX TEST FAILED

    This problem appear only in commissioning? or when a site is working for a long time? or when you do TRX loop test with BTSmanager?

    If commissioning = not important

    If TRX loop test = look at message, TS is busy, …

    If normal time = strange! Make a reset site ZEFR and wait 1hour, 1 day or more.

    #42593
    shabnam
    Guest

    please reply all the answer in this page that every body who visit the site can see

    #42594
    Geet Mukhra
    Guest

    Hi Patrik,
    I was doin trx test and ts was busy but after that trx test was done succesfuly but alarm is showing in zeol.All trx are working but alarm is not goin.

    #42595
    patrick
    Guest

    Geet Mukhra – 27 Feb 2007

    ZERO:N° Bcf; To see all TIME SLOT

    check column

    I LEV =>
    0=OK
    4=TRX HS

    OP STATE =>
    WO = ok
    BL = nok

    CH status=>
    ID = IDLE
    FR = user on line
    GP = GPRS

    If alarm come back after ZEFR, change TRX or BB2xx.

    #42596
    patrick
    Guest

    shabnam – 27 Feb 2007

    logically, new question, new post but here it is a hold-all (dustbin) and unfortunately much do not have their answer.

    #42597
    fe
    Guest

    Patrick

    What will I do if I see alarm ” BTS With no Transaction” what are its cause

    #42598
    P
    Guest

    fe – 1 Mar 2007

    ** ALARM C75152A
    (15919) 7738 BTS WITH NO TRANSACTIONS
    03

    #42599
    patrick
    Guest

    fe – 1 Mar 2007

    ** ALARM C75152A
    (15919) 7738 BTS WITH NO TRANSACTIONS
    03

    There is no trafic on your BTS(sector).

    The main explanation, it is a lost site: desert, campaign, no inhabitant, road in the middle of nowhere, …

    The alarm cancel alone.

    If you have this alarm + another 7743 or 7745 = problem

    #42600
    Arvind S. Alane
    Guest

    hi all i got one alarm while integrating one nokia BTS site i.e.BTS BUFFER OVER RUN HAPPENNED FROM THE BTS SITE, and after this alarm only 3 TRX each per sector (4+4+4) came in supervisory state can i get the reason please?

    #42601
    maunish
    Guest

    what is the diffrence betn fxc rri and e1/t1 i think both remains in the same transmission unit to transfer e1’s

    #42602
    Jam
    Guest

    Does anybody knows how to divide traffic per utilized codec(AMR FR/HR 5.9, 6,7 etc.) in NOKIA? I have found formulas that only distinguish between EFR, AMR FR and HR.

Viewing 15 posts - 121 through 135 (of 159 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.