Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

querries regarding NOKIA BTS Comm.

Viewing 15 posts - 1 through 15 (of 159 total)
  • Author
    Posts
  • #42468
    shaleen srivastava(india)
    Guest

    hello
    i’m shaleen srivastava working on NOKIa ultra site edge BTS as a BTS engg.
    i’ve some confusion regarding comm. of NOKIA BTS
    actually i couldnot able to understand the meaning of every setting which we apply during commissioning some of those setting i knew but still there many which are not clear
    can anybody put some light on my prob.
    i have read the mess. of Alexander , fadel and many more i know between us there are some genius also
    please help me in clearing my doubts
    i’ll be highly obliged to u all
    regards

    shaleen srivastava
    BTS engg.
    CH2MHill Communication Group Ltd.

    #42469
    govindarajm
    Guest

    Hi Srivastava,

    I am Govind from india . could u please list out u r doubts one by one . so i will try to clear u.

    pls Shoot u r questions

    Govind

    #42470
    patrick
    Guest

    can you precise your question? I know well ultrasite.

    #42471
    shaleen srivastava
    Guest

    thanks for all ur support friends

    and very sorry for my late reply

    can u people tell me what is that Master FIle which we load during comm.?
    hey i’ve one big odubt
    do u have any idea of E1 PCM frame mind it i’ve asked about E1 frame not the GSM frame

    if u can then please contact me through mails

    srivastava.shaleen@gmail.com

    #42472
    shaleen srivastava
    Guest

    Sir
    during commissioning how we set the abis interface.

    regards
    shaleen srivastava

    srivastava.shaleen@gmail.com

    #42473
    patrick
    Guest

    you must connected your BTS at your network for executed the commissionning.

    You select only personnal parameter of your BTS (1800, 900, output, …), the commissioning is automatic.

    #42474
    jogithomas
    Guest

    please some one can help me to integrate a nokia ultra site

    #42475
    shaleen srivastava
    Guest

    hi jogithomas
    i didn’t get ur quest.
    please tell me ur ques in a more comprehensive manner

    #42476
    Himanshu Shekhawat
    Guest

    I want to know the dimentions of ULTRA outdoor BTS Dimentions
    can i get this help

    #42477
    shaleen srivastava
    Guest

    hello himanshu
    the outdoor BTS have the same confihuration as the indoor
    but the only difference is that it has the compressor in its door
    and has the door alarm.
    if any other thing u want to ask do let me know.

    regards

    #42478
    jogithomas
    Guest

    IN NOKIA ULTRA SITE, CHANNEL FAILURE RATE ABOVE DEFINED THRESHOLD- TRX 10 , WHAT WILL BE THE PROBLEM, HOW TO SOLVE IT?

    #42479
    patrick
    Guest

    dimension of outdoor ultrasite:

    H= 1.85m
    L= 0.77m

    weight with 12TRX= 300kg
    weight empty= 150kg

    #42480
    patrick
    Guest

    (18852) 7745 CHANNEL FAILURE RATE ABOVE DEFINED THRESHOLD
    02 00 01 00 00 00 00 00 00 01 02 60d

    the last number, is a decimal value. It is a percent of error.

    If you have less than 30d, it is not a important fault.

    It is a statistic alarm, if alarm is active during a night, it is not important.

    Check you TRX (loop test), LNA (if you have), câble, feeder, coupler, …

    #42481
    shaleen srivastava(INDIA)
    Guest

    Mr. Patrick
    please clear my prob.

    on one site the PCM is creating the problem actually i’ve been informed that PCM is fluctuating even when i had checked in BSC i gat some alarm like “Slip Frequency” other than “AIS Receive” and “Fault rate monitoring”.

    please put some light on my prob.

    regards
    shaleen srivastava
    BTS Engg.
    CH2MHill Communication Group pvt. ltd.
    srivastava.shaleen@gmail.com

    #42482
    Patrick
    Guest

    check your transmission.

    ZYMO:ET,xx;

    (%) EFS
    LOCAL END 100.00
    REMOTE END 100.00

    If your counter is 100%, you don’t have problem on your PCM (BSC to BTS)

    Check your câble:

    -poor contact
    -connect all the masses with the ground

    Good luck, i have been a similiar problem for 3 month. It was a bad ground.

Viewing 15 posts - 1 through 15 (of 159 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.