[silvanus]

hi,
i have cells with which perform good HO in only one direction and high failure the opposite direction (Alcatel) which parameter can i change to improve HO in both directions?

[sanju]

Dear all..

1)Can anyone tell me what is 1×1, 1×3 frequency plan??
2)Reasons of Handover failure?

[ammad]

SDCCh drop

[Sandeep]

hi….. can any one tell me how can we reduced the sdcch drop in our network

[RF]

interference or trx faulty is one of reason of SDCCH drop

[Frenchkiss]

I checked all of reason relating SD Congestion. So I cannot Find out it exactly. I think that It relates to BSC’s software or hardware. Could you give me the good way to correct it

[dharmendra]

what the main reason for sdcch and tch drop and how i can remove

[Macai]

There are counters that indicate TCH drop reason in statistic (vendor specific):

1.TA
2.Quality
3.Low Signal Strength
4.Others( unknown)

If TCH drop reason peg in counter Quality is high. Probably you can check on the IOI= interference on idle for the specific frequency.

[Aziz]

hi,

dear rachit
the SDCCH dont require on HO attempt, check only the TCH availability.

Thks.

[Bijoy]

Rachit/Aziz
What is your opinion about SDCCH Handovers??

Br\\
Bijoy

[Uriel]

Good morning all of you, forgive me about my level n englsh, I amnot english man.

want to know de formula of SDCCH_assign_congestion_rate
please. Tanks you

[suneel kainth]

how we can clear the 7725 alarm in nokia bts

[Raul]

What is the suppli info.. if its 2 wait for CD8.0

[DaviD]

I can only help to provide formula for SDCCHBlockRate=(100.0*ATSDCMBS_s1/NATTSDPE_s1)
where ATSDCMBS_s1|(1,8): Attempted SDCCH Seizures Meeting an SDCCH Blocked State, NATTSDPE_s1|(1,7): Number of Attempted SDCCH Seizures in a Period

[SB]

To French..

SDCCH congestion could be as simply as low SDCCH dimensioning based on the number of radios you have on that sector…how is your SDCCH radio dimension done …also are those sectors having high SDCCH in BSC boarders or high traffic area?

Please review dimensining part first and increase # of SDCCH assignment as necessary..try it out increasing one or two additional..and monitor.There are location upate parameters also which may need to be looked at. Good luck !!
Thanks

[Author]

Posts