Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SDCCH congestion

Viewing 15 posts - 91 through 105 (of 116 total)
  • Author
    Posts
  • #42435
    silvanus
    Guest

    hi,
    i have cells with which perform good HO in only one direction and high failure the opposite direction (Alcatel) which parameter can i change to improve HO in both directions?

    #42436
    sanju
    Guest

    Dear all..

    1)Can anyone tell me what is 1×1, 1×3 frequency plan??
    2)Reasons of Handover failure?

    #42437
    ammad
    Guest

    SDCCh drop

    #42438
    Sandeep
    Guest

    hi….. can any one tell me how can we reduced the sdcch drop in our network

    #42439
    RF
    Guest

    interference or trx faulty is one of reason of SDCCH drop

    #42440
    Frenchkiss
    Guest

    I checked all of reason relating SD Congestion. So I cannot Find out it exactly. I think that It relates to BSC’s software or hardware. Could you give me the good way to correct it

    #42441
    dharmendra
    Guest

    what the main reason for sdcch and tch drop and how i can remove

    #42442
    Macai
    Guest

    There are counters that indicate TCH drop reason in statistic (vendor specific):

    1.TA
    2.Quality
    3.Low Signal Strength
    4.Others( unknown)

    If TCH drop reason peg in counter Quality is high. Probably you can check on the IOI= interference on idle for the specific frequency.

    #42443
    Aziz
    Guest

    hi,

    dear rachit
    the SDCCH dont require on HO attempt, check only the TCH availability.

    Thks.

    #42444
    Bijoy
    Guest

    Rachit/Aziz
    What is your opinion about SDCCH Handovers??

    Br\\
    Bijoy

    #42445
    Uriel
    Guest

    Good morning all of you, forgive me about my level n englsh, I amnot english man.

    want to know de formula of SDCCH_assign_congestion_rate
    please. Tanks you

    #42446
    suneel kainth
    Guest

    how we can clear the 7725 alarm in nokia bts

    #42447
    Raul
    Guest

    What is the suppli info.. if its 2 wait for CD8.0

    #42448
    DaviD
    Guest

    I can only help to provide formula for SDCCHBlockRate=(100.0*ATSDCMBS_s1/NATTSDPE_s1)
    where ATSDCMBS_s1|(1,8): Attempted SDCCH Seizures Meeting an SDCCH Blocked State, NATTSDPE_s1|(1,7): Number of Attempted SDCCH Seizures in a Period

    #42449
    SB
    Guest

    To French..

    SDCCH congestion could be as simply as low SDCCH dimensioning based on the number of radios you have on that sector…how is your SDCCH radio dimension done …also are those sectors having high SDCCH in BSC boarders or high traffic area?

    Please review dimensining part first and increase # of SDCCH assignment as necessary..try it out increasing one or two additional..and monitor.There are location upate parameters also which may need to be looked at. Good luck !!
    Thanks

Viewing 15 posts - 91 through 105 (of 116 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.