Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SDCCH congestion

  • This topic has 115 replies, 1 voice, and was last updated 9 years ago by Surajit Saha.
Viewing 15 posts - 76 through 90 (of 116 total)
  • Author
    Posts
  • #42420
    JAGDISH
    Guest

    WHAT IS THE REASON OF HIGH VALUE OF SDCCH TIME CONGESTION UL % IN BSC NODE.

    #42421
    m
    Guest

    Leon,

    im sorry u need to sincerely blush your GSM basics

    #42422
    JM
    Guest

    How can I improved SDCCH Setup Success?

    #42423
    Aadi
    Guest

    hi,i have a problem,i am working on TEMS,how can i improve the speed of gprs,if i get the rx level of -65db.

    #42424
    Asanka
    Guest

    give me data rate calculations for gsm voice traffic. origination of FR and HFR
    RPE-LPT

    #42425
    Sanjeet Ghosh
    Guest

    Hi to all, I am an RF Optimizer in ITI working for BSNL in MP.

    Can anyone tell me “What is out going SDCCH handover?”

    #42426
    Pix
    Guest

    Hello,

    When a MS is performing a SDCCH transfer (call setup, SMS, loc. upd.) and suffering low Rxlev, poor RxQual, or better neighbour, then the BSC will command the MS to perform aHO to a neighbour cell. The MS will resume the SDCCH transfer on a SDCCH subchannel of the target cell.

    That’s a SDCCH HO.

    in the first cell: outgoing ho
    in the target cell : incoming ho

    #42427
    Sanjeet Ghosh
    Guest

    Thanks Pix…..

    Would u kindly tell me…
    1> What is 1×1, 1×3,1×4 frequency planning?
    2> The values of RLT & it’s unit?

    #42428
    Pix
    Guest

    1/ it’s SFH techniques, a kind of frequency hopping based on a wide number of hopping channels.

    2/ Radio Link Time out, def value is 18 SACCH (= 0.48s). It’s the time before a drop is detected because no SACCH can be decoded in either direction. (18 SACCH, that’s about 9 seconds)

    #42429
    dkumar
    Guest

    hi
    please tell me about signalling transaction in terms of MSU.
    in alcatel gsm switch one sig=4 MSU how?
    no of bytes per second supported by i ss7 link 64 Kbps=8000. How?
    pl explain it.

    #42430
    GINA
    Guest

    please tell me about the gsm key perfomance indicators

    #42431
    dkumar
    Guest

    gsm key indicator
    signalling capacity for roamers international and national
    how the roamers are associated with signalling capacity.

    please tell me about signalling transaction in terms of MSU.
    in alcatel gsm switch one sig=4 MSU how?
    no of bytes per second supported by i ss7 link 64 Kbps=8000. How?
    pl explain it.

    #42432
    Bindas
    Guest

    Can anyone plz tell that how can i change the background color of cells in TEMS Investigation Route Analysis ??

    #42433
    rachit
    Guest

    do we require SDCCH also on case of handover attempt?? or we check only for tch availability

    #42434
    Rex
    Guest

    Hi rachit,
    as I know, in case of handover attempt there is no need for sdcch, BSC checks if any TCH available on target cell; if yes, HO proceeds, if no, the call will continue on the source cell (ROC – Reversed to Old Channel).
    Regards,
    Rex

Viewing 15 posts - 76 through 90 (of 116 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.