Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

C-number in Nokia BSC

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #41603
    Jus
    Guest

    How I can change so called C-number in Nokia Bsc2i Equipment ?

    What will be good in S11.5 sw REL ?

    #41604
    alexander
    Guest

    there is secret command to change c-number. ZDCN !!!! There is no description of this command in NED, moreover, there is no such command in command menu ZDC? . But if you type ZDCN you’ll see command and it’s description!!!
    be carefull, if you change c-number then all login/password will be lost, c-number used somewhere in password storyng alghoritm… even SYSTEM/SYSTEM will not work!!!

    alex

    #41605
    Alexander,Russia
    Guest

    Ok, I have seen this command in my BSC’s. But what is the reason of changing C-number? And what to do after implementation of this command?! ๐Ÿ™‚ The first answer – to begin of searching NEW FIRM after that:):)

    #41606
    hamid
    Guest

    use these commands:
    ZLE:M,MASHANGX
    ZMVL:W0-//BLCODE/APPARAGX.IMG,4;
    ZMVL:W0-//BLCODE/APPARAG2.IMG,4;
    The correct place in file is block 4,row 00B0
    IF the C-number of BSC is C 034567
    line 00B0 of the file reads:
    ..B0 67 45 03 00
    Exit the mode by pressing ctrl-c
    if the system asks:
    WRITE TO DISK Y/N? Y

    IF YOU ARE NOT PROFESSIONAL BSC MAN DO’NT DO THIS

    Good luck
    hamid

    #41607
    Jus
    Guest

    I tried according the instructions and now I do have TWO BSCs that I am not able to log on anymore !
    How I would be able to get the logon back again ??
    Hoping to get help before my boss will find out what I have done ! ๐Ÿ™‚

    #41608
    hamid
    Guest

    Hi
    you must bring up your BSCs with fallback or copy APPARAGX.IMG from fallback to system directory
    please be careful

    #41609
    Jus
    Guest

    Took the fallbacks into use, all OK. ๐Ÿ™‚

    What could have gone wrong with the instructions you gave ? Followed your steps though.

    Dangerous! Wouldn’t like to do ever again heh huh !

    Next time will just call the Nokia guys to fix things…

    #41610
    asri saudi arabia
    Guest

    hi alexander,
    long time not see you? we have meet at saudi arabia working for hajj project..
    Can tell me how to use debugger command?ZDDS..
    thanks

    #41611
    david
    Guest

    any idea about IBHO

    #41612
    Davis
    Guest

    Sorry for below typo.

    Hi Guys,

    Do you know about below problem :

    Pls. give me some solution to remove one link in NOKIA MSC wihic is associated with ckt group ,need some guidance to add or remove route from ckt group.

    /*** DX ERROR: 28501 ***/
    /*** CIRCUIT GROUP IN ROUTE ***/

    COMMAND EXECUTION ABORTED

    CIRCUIT GROUP HANDLING COMMAND
    < DX ERROR DESCRIPTION The circuit group is in a route. ///////////////////////////// I want to remove following link (CCSU)////////////////////////// 14 27 SMT UA-AD CCSU-2 1 1 2 236-16 11-05 64

    #41613
    cybhert
    Guest

    Hello Davis,

    Have you tried the NED for solving the problem?

Viewing 11 posts - 1 through 11 (of 11 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.