Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RBS/BSC Ericsson

Viewing 15 posts - 16 through 30 (of 153 total)
  • Author
    Posts
  • #41456
    Ani
    Guest

    @Cege

    If you have the DIP number, say DIP=RBLT0, you can use rxmdp command to get the tg number. Then do rxtcp for the cells.

    #41457
    Ani
    Guest

    @Cege,

    Specifically, do these set of commands:

    ntcop:snt=snt;
    stdep:dev=dev;!get dev with BUSY state for the next command!
    rxmdp:moty=rxots,dev=dev;!get the tg num!
    rxtcp:mo=rxotg-tg;

    #41458
    TULIO
    Guest

    Hi every body

    I want to configurate a BTS with TG synchronization

    I have two cabinets with two E1s each one, the configuration was made defining CLUSTERID and setting TFMODE to Mastar and Slave, but the Slave cabinet don’t has synchronism.

    Please help me

    #41459
    sajid
    Guest

    what is the latest version of erricsson rbs which is in use

    #41460
    sajid
    Guest

    can i have a list of the codes which is use to identify the reasons for site down.

    #41461
    Nur
    Guest

    Hi Cege,You can give following command.
    If DIP & TG is same of a BSC.
    Then it easy to find out the cell name.
    DIP>cell id >cell name
    rxtcp:moty=rxotg; [for getting cell id]
    rlmtp:cell=cellid,id=all;[for getting id & code value]
    rlmbp:id=50,code=2,gs=0;[for getting cell name]

    nur800736@yahoo.com

    #41462
    NARESH
    Guest

    LOGIC TO UNDERSTAND ERICSSON COMMAND
    I AM NEW TO ERICSSON BTS AND BSC PL HELP ME FOR THE SAME
    PL GIVE ME BASIC COMMAND WITH DESCRIPION

    #41463
    finn
    Guest

    TULIO – 4 Jun 2008
    Hi every body

    I want to configurate a BTS with TG synchronization

    I have two cabinets with two E1s each one, the configuration was made defining CLUSTERID and setting TFMODE to Mastar and Slave, but the Slave cabinet don’t has synchronism.

    Please help me

    you’ll have to get the time delays.. depending on the length of the feeder cables and ESB cables from master to slave plus internal. as I remember you should have around 4500-5500 milliseconds.

    have you got a manual? i can give you a formula..

    #41464
    IMa
    Guest

    please any help about tg synchronization the master cabinet work but the extension or slave cabinet doesnot work
    it was not synchronized with the master cabinet “we do all possible reasons and change all parameter “

    #41465
    ari
    Guest

    Hello all,

    Does anybody know about this alarm in BSC and how to fix it?!

    Thank you

    AP APNAME NODE NODENAME
    1 APGBSC91C B APGBSC91B

    GPS MAJOR ALARM

    DEV
    EXAL-1-13

    #41466
    finn
    Guest

    IMa – 26 Jul 2008

    please any help about tg synchronization the master cabinet work but the extension or slave cabinet doesnot work
    it was not synchronized with the master cabinet “we do all possible reasons and change all parameter ”

    change cabinet.. hehe

    #41467
    Md.Abul Kalam Azad Khan
    Guest

    Difference between concentrated LAPD,Unconcentrated LAPD and their application .How many TRX (maximum ) can be configured in Con LAPD & unconc LAPD ?

    #41468
    Dario Alfaro
    Guest

    tengo una BTS con la siguiente falla.

    RXOTS-29-4-7

    site problemm
    391545 ABIS PATH UNAVAIL

    #41469
    abdou
    Guest

    esque je peu avoir la définition de la RBS 2206 ericson et la définition de c’est diferontes parties. merci

    #41470
    finn
    Guest

    “Difference between concentrated LAPD,Unconcentrated LAPD and their application .How many TRX (maximum ) can be configured in Con LAPD & unconc LAPD ?”

    LAPD CON= 10.5 TRX
    LAPD UNCON= 15 TRX
    MULTIPLEXED= forgot

    please comment

Viewing 15 posts - 16 through 30 (of 153 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.